Free Shipping over $200 | Orders ship out at 2pm Monday-Friday
Shop3D.ca Response to Covid-19

BASF Innofil3D Showcase - 3D Printing Filament for Your Application

November 11, 2019

BASF Innofil3D Showcase - 3D Printing Filament for Your Application

Innofil3D is now BASF Ultrafuse®. New name, same product.
Explore BASF's Innofil3D line of 3D printing materials with guests, samples and giveaways. If you work with 3D printers, you should attend!

About this Event

BASF | Innofil3D Showcase

Explore their line of specialty filaments including materials like BVOH Soluable Support, Recycled PET, Glass Fiber reinforced Polypropylene and Carbon Fiber composite.

Get advice from Shop3D's Application Engineer and special guests from Innofil3D about what materials best fit your application

Metal Printing with Ultrafuse

Learn more about Ultrafuse 316L, a 80% stainless steel and 20% polymer material made for printing on many open FFF desktop printers.In a 3 step process of FFF printing, debinding and sintering you can create full metal parts. We'll have sample parts for you to handle.

Deals & Discounts

We'll be giving away two filament bundles of BVOH and PAHT CF during the event. Don't miss this chance to try out their new soluable support material with their Carbon Fiber filament.

+ an exclusive discount code for attendees

------

BASF | Innofil3D : The biggest manufacturer in Europe with an exclusive focus on 3D filaments for FDM printing. They select the best raw materials available from renowned suppliers and all of their products are 100% traceable to the source. Innofil3D was acquired by BASF in 2017 and the BASF Ultrafuse brand was created in 2018 for more industrial filaments.

------

Date: Thursday, November 21st

Time: 1pm-3pm

Location:

Shop3D.ca Mississauga
120 Watline Ave. Unit #2
Mississauga, Ontario
L4Z 2C1





Also in News

COVID-19 Face Shield Update V2.2 (March 30th, 2020)
COVID-19 Face Shield Update V2.2 (March 30th, 2020)

March 30, 2020

Continue Reading

How to print the COVID19 face shield
How to print the COVID19 face shield

March 27, 2020

Our version of the face shield is tool-free and is made out of 4 parts. TPU filament, top holder, bottom holder, and a PETG sheet. The assembly can be done by anyone in under 1 minute. The PETG sheet can be removed to be wiped clean using a virus wipe and inserted into a new or sanitized holder. 

Continue Reading

3 Things you need to know about 3D printing medical equipment
3 Things you need to know about 3D printing medical equipment

March 26, 2020

If you do have to use something like this mask then use materials the are inherently "germaphobic": 

CPE, PET, rPET, PETG, and PP would fall under this category. Notice that all the above points still apply to these materials when 3D printed! 

Continue Reading