Free Shipping over $200 | Orders ship out at 2pm Monday-Friday

Printing Investment Casting Patterns Using Polycast | Ultimaker

August 10, 2020

Printing Investment Casting Patterns Using Polycast | Ultimaker

There are four major additive technologies used in investment casting today:
  • Stereolithography (SLA)
  • Selective Laser Sintering (SLS)
  • MultiJet
  • Binder Jetting

Recent research discovered that foundries were experimenting with a fifth technology, Fused Filament Fabrication (FFF) and a material called Polycast.

In this webinar, you will explore the findings of a very popular casting supplier, Wisconsin Precision. They will compare printer performance, operating cost, and casting performance of the Ultimaker S5 against the four leading machines in the industry.

Date: August 27th, 2020 at 2 p.m. ET
Hosted by: Luis E. Rodriguez | Ultimaker

Register for the Webinar Here





Also in Webinars

A Guide to 3D Printing Materials with BASF | Shop3D.ca
A Guide to 3D Printing Materials with BASF | Shop3D.ca

September 14, 2020

Join Nate and Felix in a live chat to discuss the different 3D printing materials, their strengths, their weaknesses and their most common applications. Learn the basics of reading a material data chart, and identifying the material properties that matter to you.

Date: September 25th, 2020 at 11 a.m. ET
Hosted by: Felix & Nate Shop3D.ca

Continue Reading

BCN3D Canadian Launch with Shop3D.ca
BCN3D Canadian Launch with Shop3D.ca

September 11, 2020

Join the team at Shop3D.ca for the imminent launch of the new BCN3D 3D Printer Lineup. Virtual product demo and Q&A with Shop3D.ca Applications Engineer Felix. Tuesday, September 29th from 11:00am - 12:00pm. RSVP to reserve your spot and be reminded before the event.

Date: September 29th, 2020 at 11 a.m. EST
Hosted by: Shop3D.ca

Continue Reading

Talking Additive - Episode 11: Creating Tools, Jigs, and Fixtures on the Road to End-Use Parts | Ultimaker
Talking Additive - Episode 11: Creating Tools, Jigs, and Fixtures on the Road to End-Use Parts | Ultimaker

September 11, 2020

Talking Additive is back for a second season! Listen to hear Jabil Additive’s Director of Product Management, Matt Torosian, discuss how Jabil produces engineering-grade polymer filaments for manufacturing processes and end-use parts.

Link to Episode 11 will be available September 15th, at 11am CEST.

Date: September 15th, 2020
Hosted by: Matt Torosian | Ultimaker

Continue Reading