3rd Party Parts and Upgrades
The Olsson Ruby
$123.00
THE OLSSON RUBY - ONE NOZZLE FOR ALL MATERIALS A substantial upgrade for your 3D Printer hotend.Filament Diameter: 2.85mm or 1.75mm (please choose from options)Size: 0.4mm, 0.6mm or 0.8mm Tip Diameter...
Hardcore Seven - 3D Solex Ultimaker 3 3rd Party Drop-in Core
$360.00
The hardcore 7 is a 3D Solex retrofitted Print Core for the Ultimaker 3 that allows the changing of nozzle tips. It comes with 7 different sized nozzles in the...
Hardcore Four - 3D Solex Ultimaker 3 3rd Party Drop-in Core
$295.00
The hardcore 4 is a 3D Solex retrofitted Print Core for the Ultimaker 3 that allows the changing of nozzle tips. It comes with 4 different sized nozzles that can be changed...
Hardcore Two - 3D Solex Ultimaker 3 3rd Party Drop-in Core
$255.00
The hardcore 2 is a 3D Solex retrofitted Print Core for the Ultimaker 3 that allows the changing of nozzle tips. It comes with 4 different sized nozzles that can be...
Matchless Block V3 Grand Kit with 11 Nozzles for Ultimaker 2/2+ Family
$209.00
So what is the V3 Matchless Block? It’s an upgraded heater block for the Ultimaker 2 series of 3D printers that allows the extruder nozzle to be swapped within seconds, as opposed to...
Matchless block V3 kit with 4 nozzles for Ultimaker 2/2+ Family
$159.00
So what is the V3 Matchless Block? It’s an upgraded heater block for the Ultimaker 2 series of 3D printers that allows the extruder nozzle to be swapped within seconds, as opposed to...
Olsson Block Kit and 0.4mm Nozzle for Ultimaker 2 / 2+ Family
$70.75
So what is an Olsson Block? It’s a modification for the Ultimaker 2 series of 3D printers that allows the extruder nozzle to be swapped within seconds, as opposed to replacing...
Everlast Ruby/Sapphire Nozzle for 3D Solex Hardcore Printcore
$99.00
Super hard nozzle. Made from ruby or sapphire. Sapphire and ruby are one level softer on the hardness scale from Diamond. Print many spools of CF filament with no wear. ...
0.5mm Steel Ice Nozzle for 3D Solex Hardcore Printcore
$31.00
Hardened steel nozzle. An economical way to handle abrasive filaments for the Ultimaker 3 through the 3D Solex Hardcore Printcore. ICE coated SS .5mm nozzle for 3DSolex HardCore block (not compatible with...
Premium 0.50mm Hardened Jet Steel Nozzle for Ultimaker 2+ / E3D by Anders Olsson (Sweden)
$19.00
This is the premium Sweden made Anders Olsson 0.50mm Nozzle for the Olsson Block or the Ultimaker 2+ series of 3D printers (also fits E3D hotends). These nozzles are held...
Matchless Chrome Nozzles for Ultimaker 2+ family by 3D Solex
$18.50
These are Chrome Plated Matchless Nozzles for the Olsson Block or the Ultimaker 2+ series of 3D printers. The matchless nozzles are chrome plated to stay cleaner longer and has special internal channels...
0.50mm Hardened Jet Steel Nozzle for Ultimaker 2+ family and Olsson Block RSS50
$16.00
This is a 0.50mm fast Nozzle for the Olsson Block or the Ultimaker 2+ series of 3D printers. Built tough to resist corrosion when printing with abrasive materials (Carbon...
Premium Brass Nozzles for Ultimaker 2+/ E3D family by Anders Olsson (Sweden)
$14.00
These are premium extremely high quality replacement Nozzles for the Olsson Block or the Ultimaker 2+ series of 3D printers. Extra High quality replacement nozzles for when your original nozzles get too dirty...
Brass Replacement Nozzles for Ultimaker 2+ family and Olsson Block
$12.50
These are third-party replacement Nozzles for the Olsson Block or the Ultimaker 2+ series of 3D printers. Good quality replacement nozzles for when your original nozzles get too dirty or wears out...
Enclosure (Top Cover) Kit for Ultimaker S5
Sold Out
Note: This kit requires assembly of the enclosure. Estimated time is ~20 minutes, minimal skill required. Use the Ultimaker S5 Enclosure kit to regulate the temperature and reduce temperature fluctuations for improved...
Enclosure Kit for Ultimaker 2+ / 3 Family
$195.00
Note: This kit requires assembly of the enclosure. Estimated time is ~40 minutes, minimal skill required. Use the Ultimaker 3 Enclosure kit to regulate the temperature and reduce temperature fluctuations for improved...
Tamper Proof Enclosure Kit for Ultimaker 2+ / 3
$210.00
Note: This kit requires assembly of the enclosure. Estimated time is ~40 minutes, minimal skill required. Use the Ultimaker 2+ / 3 Tamper Proof Enclosure kit to regulate regulate the temperature and...
Adhesion Sheet for Ultimaker Glass Bed
$2.25
The Adhesion sheet is a thin printing aid that helps certain materials (especially engineering filaments) get a good stick to your heated bed. The adhesion sheet is self adhesive and...
3D Solex Super Slip Oil Stick XL
$19.99
3D Solex Super Slip Oil Stick XL - Machine oil applicator and reservoir Apply a tiny amount to your XY rods for a smooth running printer. Never dries out. Comes in this XL...
The Olsson Ruby 1.75mm High Output (HO)
$123.00
THE OLSSON RUBY - ONE NOZZLE FOR ALL MATERIALS A substantial upgrade for your 3D Printer Hot-end. Filament Diameter: 1.75mm Size: 0.40mm or 0.8mm Tip Diameter (Please choose from options)...
3D Print Clean - 870 Pro Enclosure
$3,895.00
* 3D Print Clean Enclosures are custom made to order, please allow 3-6 weeks for customization, assembly and delivery. * * Free Delivery does not apply for this order. LTL shipping...
3D Print Clean - Pro Enclosure Replacement Filter Set
$439.00
Replacement Filters for 3D Print Clean Enclosures (660 and 870 Pro) This comes in a set of 2 Filters: 1 x UFP Filter1 x VOC Filter Filters are individually sealed. ...
Olsson Ruby 1.75mm - MK8
$123.00
THE OLSSON RUBY - ONE NOZZLE FOR ALL MATERIALS A substantial upgrade for your 3D Printer hotend.Filament Diameter: 1.75mm Size: 0.4mm or 0.6mm Tip Diameter (Please choose from options) Compatable with:...
The Olsson Ruby High Temp
Sold Out
Olsson's flagship nozzle for high temp applications up to 500 C°.Made from high conductivity copper and coated with a high-performance non-stick chromium nitride surface. The original ruby tipped nozzle was...
