Free Shipping over $200 | Orders ship out at 2pm Monday-Friday

PrintDry Filament Dryer

Product SKU: FD1603

Available Stock:
Loading...
The Print Dry Filament Container now comes with a Vacuum Pump and 1 container instead of D spools
The container is not clear, as shown in the video, but a translucent white

Printdry Filament Dryer: Revitalize your exposed filament and put them back to work

Most filaments absorb moisture from the air readily. When moisture content goes up in a filament, the printability goes down and may lead to the filament becoming un-printable.

After many years experiencing moisture-related problems during in-house 3D printing. PrintDry has finally come up with a powerful solution -- The PrintDry filament dryer. The PrintDry filament dryer is an in-line filament dryer, which is designed to dry and to feed the filament into a 3D printer at the same time as drying.

Technical Specs
  • Dryer Temp Range: 35-70°C  or  95-160°F *
  • Continuous Drying Time: 40 Hours (max)
  • Power Supply: 120VAC/60Hz or 220VAC/50Hz, 245W
  • Spool Dimensions: 
    OD 100-250mm (4-10″),
    Height 25-125mm (1-5″), 
    Spool Mounting Hole Diameter 19-58mm (3/4-2.3″)
  • Spool Weight: max. 2Kg (4.5 lbs)
  • Weight: 3.8Kg  or  8.5lbs
  • Size: 370x370x360mm  or  15x15x15″
What's Included
  • 1 PrintDry Filament Dryer
  • 1 Feeder for the top chamber
  • 1 Vacuum container
  • 1 Pump
Dry Time Chart

RECOMMENDED DRYING TIME

No.
Materials
Dryer Temp
Drying Time
1
PLA
45°C (113°F)
> 4h
2
ABS
60°C (140°F)
> 2h
3
PETG
65°C (149°F)
> 2h
4
Nylon
70°C (158°F)
> 12h
5
Dessicant
65°C (149°F)
> 3h
6
PVA
45°C (113°F)
> 10h
7
TPU/TPE
50°C (122°F)
> 4h
8
ASA
60°C (140°F)
> 4h
9
PP
55°C (131°F)
> 6h
10
HIPS
60°C (140°F)
> 4h
Highlights
* Please note the actual temperature inside a dryer varies due to (1) ambient temperature; (2)location; (3)how many filament spools and desiccant pouches. Higher ambient temperature means higher temperature inside a dryer.
More close to the heat source the temperature is higher. The lower chamber of a dryer is about 8C higher than the upper chamber.
More filament spools and desiccant pouches inside a dryer can increase the dryer internal temperature.
These Recommended Settings are made for the Following Conditions
* Ambient RH: 50% * Ambient Temp: 20°C (68°F) * 500g (1 lbs) filament spool
Actual drying time for a filament may vary under different environmental conditions as well as the initial water content levels in the filament. In addition to drying prior to 3D printing, drying the filament while printing is always recommended.

Our Expert Staff Are Here to Help

We are available to assist you in finding the right fit for your project while answering your technical questions.
  • Toronto
    905-501-8558
    10am-6pm EST, Monday-Friday
  • Vancouver
    604-336-9393
    10am-6pm PST, Monday-Friday
Speak with our Applications Engineer to find efficiencies and determine your ROI - Book a Technical Consultation

Related Items