Free Shipping over $200 | Orders ship out at 2pm Monday-Friday

Innofil ABS Fusion+ Filament 2.85mm - 750gr. (Netherlands)

Product SKU: ABSF-0208b075

Available Stock:


Innofil3D and Polyscope Polymers have partnered up and developed a PVA compatible ABS filament for 3D printing known as ABS Fusion+.  Typical ABS filaments will not be compatible with PVA water soluble support in dual extrusion printers but ABS Fusion+ solves that problem and allows for highly technical and complex ABS prints.

While ABS is an ideal material for some due to its versatile nature, it never really lived up to the expectations because of the challenge of its lack of adhesion to support materials and some bed surfaces.

ABS Fusion+ resolves that issue for users with its ability to adhere to water soluble support material, build platform and low warping.  This allows for hassle free printing of all your ABS needs.

 TDS and MSDS are available here.

The properties of ABS Fusion+ are:

  • Chemical resistance
  • High heat resistance
  • Low warping
  • Compatible with INNOSOLVE PVA
  • Tough
 ABS Fusion+ Test Notes:

 We've tested a large variety of ABS materials throughout the years and only a few have been user friendly enough for us to carry in our product lineupABS Fusion+ restores our faith in the material by addressing most of the problems commonly associated with ABS.  ABS Fusion+ from Innofil is how ABS printing was meant to be.

 Layer splitting is finally a symptom of the past when previous ABS prints tend to split along layer lines which is caused by bad inter-layer adhesion and warping forces. ABS Fusion+ changes all that by virtually eliminating the warping forces. With similar warping properties as PLA, Fusion is much more dimensionally stable, predictable and durable along layer lines as a result. This also means that printing large parts in ABS will no longer result in peeled up edges but supports will still be easy to remove.

 Another factor playing into ABS Fusion's user friendliness is its ability to stick to heated glass beds without additives. You can print directly onto the bed as you do with PLA and it will happily stick and stay flat. No more ABS slurry and esoteric rituals to get your ABS parts to adhere. What is even more astonishing is how ABS Fusion+ sticks to PVA supports. While other ABS's were limited to HIPs or same material supports, ABS Fusion can now print with PVA supports on the Ultimaker 3 which greatly expands it's usefulness and ease of use.

 In terms of mechanical properties, it is very similar to standard ABS with much more toughness and impact resistance than PLA. It is slightly softer than PLA but with much better heat resistance. ABS has been favored in the past not just for it's mechanical properties, but also it's elegant matte finish compared to the 'shiny plastic' look of most other materials. ABS prints look and feel slightly more 'premium and clean' due to it's matte finish.

 ABS Fusion is still ABS, and smells like ABS when printed. The odor is much stronger when compared to Ultimaker ABS and we recommend printing only in an enclosed printer or in a well ventilated area.

 We have not tested acetone smoothing yet, but it should work. Please e-mail us if you attempt this with success or failure so we can update this posting.

 ABS printing has been an exercise in frustration for a long time, but with ABS fusion+ the majority of inherent ABS problems have been solved and we are happy to offer it as the most user-friendly ABS material available.


Print settings (ultimaker)

 -ABS preset

-240C - 260C
-Bed temp: 100C
-Bed adhesion: Clean glass or Dimafix
-Fan speed 0% (super important)
-Enclosure/filter/ventilation required

Our Expert Staff Are Here to Help

Our expert staff is available to assist you in finding the right fit for your project while answering your technical questions.
  • Toronto
    10am-6pm EST, Monday-Friday
  • Vancouver
    10am-6pm PST, Monday-Friday
Speak with our Applications Engineer to find efficiencies and determine your ROI - Book a Technical Consultation

Related Items