{"title":"Professional Materials","description":"","products":[{"product_id":"basf-ultrafuse-pa6-gf30-700-grams","title":"Forward AM Ultrafuse® PA6 GF30 - 700 grams","description":"\u003cdiv class=\"block-quote\"\u003eForward AM Material is proudly produced in Europe\u003c\/div\u003e\n\u003cb\u003eForward AM Ultrafuse® PA6 GF30 Filament.\u003c\/b\u003e\n\u003cdiv class=\"section clearfix\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eOverview\u003c\/div\u003e\n\u003cbr\u003e\n\u003cp\u003eUltrafuse® PA6 GF30 contains 30% of special glass fibers, which are designed for filament making and 3D printing. PA6 GF30 has a reduced warping compared to neat PA6 which makes Ultrafuse® PA6 GF30, with its excellent layer adhesion and its compatibility with the water soluble Ultrafuse® BVOH, the right solution for industrial parts printable on any standard FFF printer. With its high wear and chemical resistance and the high stiffness and strength, Ultrafuse® PA6 GF30 is perfect for various applications in transportation or industrial tooling.\u003c\/p\u003e\n\n\u003cdiv class=\"product-heading-bar\"\u003eBenefits\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eVery high stiffness and strength\u003c\/li\u003e\n\u003cli\u003eGood chemical resistance\u003c\/li\u003e\n\u003cli\u003eResistance to UV light\u003c\/li\u003e\n\u003cli\u003eHigh wear resistance\u003c\/li\u003e\n\u003cli\u003eExcellent layer adhesion\u003c\/li\u003e\n\u003cli\u003eWorks with BVOH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"one-half-first\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eMaterial Properties\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTensile Strength (MPa): \u003c\/b\u003e78.3 \/ 46.4 (XY) , 14.9 \/ 12.2 (ZX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEnglogation at Break (%): \u003c\/b\u003e 2.2 \/ 3.2 (XY) , 0.8 \/ 1.9 (ZX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlexural Modulus (MPa): \u003c\/b\u003e4694 \/ 2861 (XY) , 8103 \/ 4300 (XZ) , 2371 \/ 1070 (ZX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eImpact Strength Charpy Unnotched (kJ\/m2): \u003c\/b\u003e38.9 \/ 41.8 (XY) , 45.5 \/ 48.8 (XZ) , 2.2 \/ 3.1 (ZX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eImpact Strength Izod Unnotched (kJ\/m2): \u003c\/b\u003e38.4 \/ 36.9 (XY) , 38.7 \/ 41.4 (XZ) , 2.6 \/ 3.8 (ZX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHDT @ 0.45 MPa (°C): \u003c\/b\u003e 110\/114\u003c\/li\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-last\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eProcessing Recommendations\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNozzle Temperature: \u003c\/b\u003e 240-280 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild Chamber Temperature: \u003c\/b\u003e Passively Heated, Closed Chamber\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e Bed Temperature: \u003c\/b\u003e70-100 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBed modification: \u003c\/b\u003eGlass\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrying Procedure: \u003c\/b\u003e Dry the filament at 100°C for at least 5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSupport Materials: \u003c\/b\u003eBVOH\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNozzle Diameter:\u003c\/b\u003e ≥ 0.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrint Speed: \u003c\/b\u003e 30-60m\/sec\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section clearfix\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-heading-bar\"\u003ePrinting Profiles\u003c\/div\u003e\n\u003cbr\u003e \u003cb\u003e To print the best possible way with Forward AM filaments \u003c\/b\u003e\n\u003cp\u003eForward AM provides you with a large range of printing profiles for their materials based on different well-known printer manufacturers like Ultimaker, Raise3D and BCN3D\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/forward-am.com\/printing-profiles\/\"\u003e View Printing Profiles Here \u003c\/a\u003e\u003c\/p\u003e","brand":"Forward AM","offers":[{"title":"1.75mm","offer_id":42509895205078,"sku":"50768382","price":75.0,"currency_code":"CAD","in_stock":true},{"title":"2.85mm","offer_id":42509895270614,"sku":"50768383","price":75.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/products\/Ultrafuse-PP-GF30-Black-180911008638.png?v=1645119620"},{"product_id":"raise3d-hyper-speed-abs-filament-1-75mm-1kg-natural","title":"Raise3D Hyper Speed ABS Filament - 1.75mm (1kg)","description":"\u003cdiv class=\"section clearfix\"\u003e\n\u003cb\u003eRaise3D Hyper Speed ABS Filament\u003c\/b\u003e\n\u003cp\u003eHyper Speed ABS Filament is one of the specially developed filaments from the High-speed filament line for FFF printing. When printing at high speeds, the filament is rapidly fed into the heat block, and the polymer has very little time to melt, from solid to a molten state, which can cause nozzle clogging and poor bonding quality between layers. Additionally, ABS can be subject to warpage and delamination of the printed part during high-speed printing without a heated chamber.\u003c\/p\u003e\n\u003cp\u003eWith optimized molecular weight and stiffness, Raise3D Hyper Speed ABS is capable of achieving faster melting and cooling during high-speed printing, which results in lower temperature gradient and inner-stress of printed part. With almost no warpage and improved interlayer bonding, Hyper Speed ABS is also perfectly suitable for many functional prototyping parts, tools and fittings with many different possibilities for post-processing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Highlights--\u003e\n\u003cdiv class=\"section clearfix\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eTechnical Specs\u003c\/div\u003e\n\u003cdiv class=\"product-description-block\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/Raise3D_Hyper-Speed-ABS-Filament_TDS_V2.0.docx?v=1676470076\" target=\"_blank\"\u003eTechnical Data Sheet\u003c\/a\u003e | \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/Raise3D_Hyper-Speed_ABS_SDS_V1.pdf?v=1676470076\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Raise3D","offers":[{"title":"Natural V2","offer_id":44761365020886,"sku":"[S]5.11.19115A01","price":52.0,"currency_code":"CAD","in_stock":true},{"title":"Black V2","offer_id":44761365053654,"sku":"[S]5.11.19114A01","price":52.0,"currency_code":"CAD","in_stock":true},{"title":"Grey V2","offer_id":44761365086422,"sku":"[S]5.11.19116A01","price":52.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/products\/Raise3D-Hyper-Speed-ABS-Filament-2-1.jpg?v=1676470173"},{"product_id":"bambu-lab-pa6-cf","title":"Bambu Lab - PA6-CF (1.75mm) 1kg","description":"\u003c!-- Overview --\u003e\n\u003cdiv class=\"section clearfix\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eOverview\u003c\/div\u003e\n\u003cdiv class=\"product-description-block\"\u003e\n\u003cp\u003eBambu PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement provides significantly high stiffness and strength properties in dry environments and maintains exceptional heat resistance and impact resistance. Similar to other Bambu CF Filaments, these outstanding mechanical properties make it an ideal choice for printing fixtures, clamps, automotive and mechanical components and various structural and engineering parts that used in dry environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Product Specifications \u0026 Properties --\u003e\n\u003cdiv class=\"section clearfix\"\u003e\n\u003cdiv class=\"section clearfix\"\u003e\n\u003cdiv class=\"one-half-first\"\u003e\n\u003cdiv class=\"product-description-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section clearfix\"\u003e\n\u003cdiv class=\"product-description-block\"\u003e\n\u003cdiv class=\"section clearfix\"\u003e\n\u003ctable style=\"margin-left: auto; margin-right: auto;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003eNormal PA-CF\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003ePA6-CF\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003eImproved %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrength (Bending Strength - XY, dry state)\u003c\/td\u003e\n\u003ctd\u003e128 MPa\u003c\/td\u003e\n\u003ctd\u003e151 MPa\u003c\/td\u003e\n\u003ctd style=\"color: #ee4b2b;\"\u003e18%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStiffness (Bending Modulus - XY, dry state)\u003c\/td\u003e\n\u003ctd\u003e4420 MPa\u003c\/td\u003e\n\u003ctd\u003e5460 MPa\u003c\/td\u003e\n\u003ctd style=\"color: #ee4b2b;\"\u003e24%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 style=\"text-align: center;\"\u003eExceptional Thermal Resistance\u003c\/h4\u003e\n\u003ctable style=\"margin-left: auto; margin-right: auto;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003eFilament\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003ePLA Basic\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003ePETG Basic\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003eABS\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003eASA\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003ePC\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #001b5e;\"\u003ePA6-CF\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003ePAHT-CF\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003ePET-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat Deflection Temperature \/ °C (0.45 MPa)\u003c\/td\u003e\n\u003ctd\u003e57 °C\u003c\/td\u003e\n\u003ctd\u003e69 °C\u003c\/td\u003e\n\u003ctd\u003e87 °C\u003c\/td\u003e\n\u003ctd\u003e100 °C\u003c\/td\u003e\n\u003ctd\u003e117 °C\u003c\/td\u003e\n\u003ctd\u003e186 °C\u003c\/td\u003e\n\u003ctd\u003e194 °C\u003c\/td\u003e\n\u003ctd\u003e205 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"section clearfix\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Parameters Comparison --\u003e\n\u003cdiv class=\"section clearfix\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eParameters Comparison\u003c\/div\u003e\n\u003cdiv class=\"product-description-block\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003eNormal PA6-CF\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003ePA6-CF\u003c\/td\u003e\n\u003ctd class=\"bold\" style=\"color: #007bff;\"\u003ePAHT-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003eNylon 6, carbon fiber\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003eNylon 6, carbon fiber\u003c\/td\u003e\n\u003ctd\u003ePA12 and other long-chain PA, carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAMS Compatibility\u003c\/td\u003e\n\u003ctd\u003eNO\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003eNO\u003c\/td\u003e\n\u003ctd\u003eYES\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry Out Before Use\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003eRequired\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 100 mm\/s\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003e\u0026lt; 100 mm\/s\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 100 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinter Type\u003c\/td\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToughness (Impact Strength - XY, dry state)\u003c\/td\u003e\n\u003ctd\u003e35.7 kJ\/m²\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003e40.3 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003e57.5 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToughness (Impact Strength - XY, wet state)\u003c\/td\u003e\n\u003ctd\u003e65.4 kJ\/m²\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003e57.2 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003e62.3 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrength (Bending Strength - XY, dry state)\u003c\/td\u003e\n\u003ctd\u003e141 MPa\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003e151 MPa\u003c\/td\u003e\n\u003ctd\u003e125 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrength (Bending Strength - XY, wet state)\u003c\/td\u003e\n\u003ctd\u003e67 MPa\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003e95 MPa\u003c\/td\u003e\n\u003ctd\u003e115 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Strength (Bending Strength - Z, dry state)\u003c\/td\u003e\n\u003ctd\u003e72 MPa\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003e80 MPa\u003c\/td\u003e\n\u003ctd\u003e61 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Strength (Bending Strength - Z, wet state)\u003c\/td\u003e\n\u003ctd\u003e31 MPa\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003e45 MPa\u003c\/td\u003e\n\u003ctd\u003e49 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStiffness (Bending Modulus - XY, dry state)\u003c\/td\u003e\n\u003ctd\u003e4870 MPa\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003e5460 MPa\u003c\/td\u003e\n\u003ctd\u003e4230 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStiffness (Bending Modulus - XY, wet state)\u003c\/td\u003e\n\u003ctd\u003e1890 MPa\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003e3560 MPa\u003c\/td\u003e\n\u003ctd\u003e3640 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Adhesion (Impact Strength - Z, dry state)\u003c\/td\u003e\n\u003ctd\u003e11.6 kJ\/m²\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003e15.5 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003e13.3 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat Resistant (HDT, 0.45 MPa)\u003c\/td\u003e\n\u003ctd\u003e177 °C\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003e186 °C\u003c\/td\u003e\n\u003ctd\u003e194 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaturated Water Absorption Rate \/ % (25 °C，55% RH)\u003c\/td\u003e\n\u003ctd\u003e3.80\u003c\/td\u003e\n\u003ctd style=\"color: #007bff;\"\u003e2.35\u003c\/td\u003e\n\u003ctd\u003e0.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Downloads --\u003e\n\u003cdiv class=\"section clearfix\"\u003e\n\u003cdiv class=\"product-description-block\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Bambu Lab","offers":[{"title":"1kg","offer_id":45332702232790,"sku":"N05-K0-1.75-1000-spl","price":101.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/PA6-CF_1600x_e95b910c-0b59-45e2-a05d-f74988ae3933.jpg?v=1697652548"},{"product_id":"raise3d-hyper-core-abs-cf15-filament-1kg","title":"Raise3D Hyper Core ABS CF15 Filament - 1.75mm (1kg) - Black","description":"\u003cdiv class=\"section clearfix\"\u003e\n\u003cb\u003eRaise3D Hyper Core ABS CF15 Filament\u003c\/b\u003e\n\u003cp\u003eRaise3D’s Hyper Core ABS CF15 filament is specially developed utilizing special extrusion technology to form a fiber-rich inner core where most of the carbon fibers are well-aligned and distributed. During high-speed FFF printing, the outstanding heat conductivity of carbon-fiber core accelerates filament melting in the hot end. Moreover, the residual thermal energy of the fiber-rich inner core promotes the interlayer bonding of ABS across the adjacent lines to form a smooth and strong part. The Hyper Core ABS CF15 filament is designed for a fast-melting rate as well as balancing print quality, performance and cost.\u003c\/p\u003e\n\u003cp\u003eHyper Core ABS CF15 inherits excellent impact toughness, good chemical resistance and low moisture absorption of terpolymer ABS matrix. Moreover, special fiber distribution improves the Z-direction strength and stiffness, in addition to the prolonging the life of the nozzle. It is an ideal choice for volume production of industrial-grade applications where high performance, stability and efficiency are required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Highlights--\u003e\n\u003cdiv class=\"section clearfix\"\u003e\n\u003cdiv class=\"one-half-first\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eSpecifications\u003c\/div\u003e\n\u003cdiv class=\"product-description-block\"\u003e\n\u003cbr\u003e\u003ca href=\"https:\/\/s1.raise3d.com\/2024\/01\/Raise3D-Hyper-Core-ABS-CF15_TDS_V1.0.pdf\" target=\"_blank\" data-mce-href=\"https:\/\/s1.raise3d.com\/2024\/01\/Raise3D-Hyper-Core-ABS-CF15_TDS_V1.0.pdf\"\u003eTechnical Data Sheet\u003c\/a\u003e | \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/Raise3D_Hyper-Speed-PLA_SDS_V1.pdf?v=1676470353\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/Raise3D_Hyper-Speed-PLA_SDS_V1.pdf?v=1676470353\"\u003eSafety Data Sheet\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-half-last\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eCompatibility\u003c\/div\u003e\n\u003cdiv class=\"product-description-block\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 kg Filament: Raise3D Pro3 HS Series; Raise3D Pro3 Series with Hyper Speed Upgrade Kit; Raise3D RMF500\u003c\/li\u003e\n\u003cli\u003e2.5 kg Filament: Raise3D RMF500\u003cspan style=\"color: rgb(33, 37, 41); font-family: Montserrat, system-ui, -apple-system, 'Segoe UI', Roboto, 'Helvetica Neue', 'Noto Sans', 'Liberation Sans', Arial, sans-serif, 'Apple Color Emoji', 'Segoe UI Emoji', 'Segoe UI Symbol', 'Noto Color Emoji'; font-size: 14px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; display: inline !important; float: none;\" data-mce-style=\"color: rgb(33, 37, 41); font-family: Montserrat, system-ui, -apple-system, 'Segoe UI', Roboto, 'Helvetica Neue', 'Noto Sans', 'Liberation Sans', Arial, sans-serif, 'Apple Color Emoji', 'Segoe UI Emoji', 'Segoe UI Symbol', 'Noto Color Emoji'; font-size: 14px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; display: inline !important; float: none;\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eRaise3D Industrial PET Support\u003c\/li\u003e\n\u003cli\u003e0.4 mm (default), 0.2\/ 0.6\/ 0.8\/ 1.0 mm (slicing profiles coming soon)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Please use the latest ideaMaker Version  for Hyper Core ABS CF15 filament.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Raise3D","offers":[{"title":"Default Title","offer_id":46305468154070,"sku":"[S]5.11.19062A01","price":125.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/HS-ABS-CF15-1.jpg?v=1731364968"},{"product_id":"bambu-lab-tpu-for-ams-1-75mm-1kg","title":"Bambu Lab - TPU for AMS (1.75mm) 1kg","description":"\u003cp\u003e\u003cb\u003eBambu Lab TPU for AMS \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eBambu TPU for AMS redefines your TPU printing experience with enhanced performance and seamless AMS integration. Perfectly suited for vibrant multicolour projects, it opens up exciting possibilities in flexible material printing. With a Shore hardness of 68D, Bambu TPU for AMS offers impressive toughness while minimizing stringing, delivering the ease of PLA printing alongside TPU's signature flexibility and durability\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Black","offer_id":46492173402326,"sku":"U02-K0-1.75-1000-SPL","price":49.99,"currency_code":"CAD","in_stock":true},{"title":"White","offer_id":46492173435094,"sku":"U02-W0-1.75-1000-SPL","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/TPU_for_AMS_White.jpg?v=1738174840"},{"product_id":"bambu-pc-fr-black","title":"Bambu Lab - PC FR - Black (1.75mm) 1kg","description":"\u003c!-- Short Description--\u003e\n\u003cdiv style=\"text-align: center;\" class=\"product-heading-bar\"\u003eCreate with Light, Shadow and a Wide Range of Colors\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eBambu PC FR is a high-performance polycarbonate engineered for demanding applications requiring superior flame retardancy, impact resistance, and heat stability. With outstanding durability, Bambu PC FR excels across a wide range of professional applications, including industrial components, protective casings, and high-temperature environments in sectors like automotive, electronics, and manufacturing.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/PC_FR_Banner.png?v=1734597495\" style=\"text-align: center; width: 100%;\" alt=\"PC FR.\"\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\" class=\"product-heading-bar\"\u003eTop-Tier Flame Retardancy\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eTested to meet to the \u003cstrong\u003eUL 94-2023 V-0 \u003c\/strong\u003estandard, the top level of flame resistance for 3D printing filament, Bambu PC FR is engineered to prevent or slow flame propagation with exceptional self-extinguishing properties. Ideal for critical applications in electronics, automotive, and mechanical engineering.\u003c\/p\u003e\n\u003cp\u003e* UL 94 is a plastics flammability standard established by Underwriters Laboratories (USA). V-0—the highest UL 94 V rating—indicates that burning stops within 10 seconds on a vertically positioned specimen, with dripping particles allowed as long as they are not ignited.\u003c\/p\u003e\n\u003csection class=\"container content\"\u003e\n\u003cdiv class=\"halves\"\u003e\n\u003cdiv class=\"block\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/PC_FR_K1_1.png?v=1734597495\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"block\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/PC_FR_K1_2.png?v=1734597493\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cdiv style=\"text-align: center;\" class=\"product-heading-bar\"\u003eEngineering-Level Mechanical Properties\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eBambu PC FR is an engineering-grade material with toughness comparable to PAHT-CF. Its exceptional stiffness and strength make it a top choice for structural components and protective casings.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/PC_FR_K2_MO.png?v=1734597492\" style=\"text-align: center; width: 100%;\" alt=\"PC FR.\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRFID for Intelligent Printing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/bambu-lab_animation-ezgif.com-optimize.gif?v=1714150153\" style=\"text-center: align; width: 100%;\" alt=\"Bambu Labs Animation\"\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 156.8px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 30.4042%; height: 19.6px;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 28.471%; text-align: center; height: 19.6px;\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.5975%; text-align: center; height: 19.6px;\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"width: 30.4042%; height: 58.8px;\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 28.471%; height: 58.8px; text-align: center;\"\u003eSmooth PEI Plate,Textured PEI Plate\u003c\/td\u003e\n\u003ctd style=\"width: 40.5975%; height: 58.8px; text-align: center;\"\u003eCool Plate SuperTack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 30.4042%; height: 19.6px;\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 28.471%; height: 19.6px; text-align: center;\"\u003eAll Size \/ Material\u003c\/td\u003e\n\u003ctd style=\"width: 40.5975%; height: 19.6px; text-align: center;\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 30.4042%; height: 39.2px;\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 28.471%; height: 39.2px; text-align: center;\"\u003eBambu Liquid Glue\u003cbr\u003eGlue Stick\u003c\/td\u003e\n\u003ctd style=\"width: 40.5975%; height: 39.2px; text-align: center;\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 30.4042%; height: 19.6px;\"\u003e\u003cstrong\u003eAMS \u0026amp; AMS lite\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 28.471%; text-align: center; height: 19.6px;\"\u003eAMS\u003c\/td\u003e\n\u003ctd style=\"width: 40.5975%; text-align: center; height: 19.6px;\"\u003eAMS lite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"section clearfix\"\u003e\n\u003cdiv class=\"one-third-first\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eRecommended Printing Settings\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying Settings (Blast Drying Oven):\u003c\/strong\u003e 80 °C, 8 h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinting and Keeping Container's Humidity:\u003c\/strong\u003e \u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Temperature:\u003c\/strong\u003e 260 - 280 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed Temperature (with Glue):\u003c\/strong\u003e 90 - 110 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinting Speed:\u003c\/strong\u003e \u0026lt; 300 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-third-middle\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003ePhysical Properties\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.18 g\/cm³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVicat Softening Temperature:\u003c\/strong\u003e 114 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat Deflection Temperature:\u003c\/strong\u003e 113 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMelting Temperature:\u003c\/strong\u003e 225 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMelt Index:\u003c\/strong\u003e 26.4 ± 2.7 g\/10 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"one-third-last\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eMechanical Properties\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Strength:\u003c\/strong\u003e 60 ± 4 MPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking Elongation Rate:\u003c\/strong\u003e 2.4 ± 0.3 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBending Modulus:\u003c\/strong\u003e 1890 ± 70 MPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBending Strength:\u003c\/strong\u003e 90 ± 4 MPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Strength:\u003c\/strong\u003e 55 ±2.1 kJ\/m²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003c!-- Downloads --\u003e\u003c\/p\u003e\n\u003cdiv class=\"section clearfix\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eDownloads\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/store.bblcdn.com\/s1\/default\/4adf3c9827a0475d8777e9b8cfd11fbe.pdf\"\u003eFilament TDS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/store.bblcdn.com\/s1\/default\/74e912f5fa17467c94e92af2ab913346.pdf\"\u003eFilament MSDS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/store.bblcdn.com\/s1\/default\/8f1f399e5f7f4101980977fc59f34687.pdf\"\u003eFilament RoHS\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-heading-bar\"\u003ePrinting Tip\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eDrying Conditions\u003c\/strong\u003e：\u003c\/p\u003e\n\u003cp\u003eDry before use for higher printing quality. PC FR must be dried before use and kept moisture-free during the printing process. Store in a dry environment, such as an airtight storage container with a desiccant, after use. For more details, please refer to:\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/pa-cf-printing-tips\"\u003ePrinting tips for Engineering materials \u003c\/a\u003e on WIKI.\u003c\/p\u003e\n\u003cp\u003eIn a blast drying oven: 80°C for 8 hours.\u003cbr\u003eOn an X1 printer's heatbed: 90°C to 100°C for 12 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Attention:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe nozzle temperature should be between 260-280°C, and the heat bed temperature should be between 90-110°C. Please ensure safety during printing.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":47066946633942,"sku":"C01-K0-1.75-1000-SPL","price":69.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/PC-FR.jpg?v=1752856700"},{"product_id":"bambu-lab-petg-cf-1-75mm-1kg","title":"Bambu Lab - PETG-CF (1.75mm) 1kg","description":"\u003cp\u003e\u003cb\u003e Bambu Lab PETG-CF (1.75mm) 1Kg \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eBambu PETG-CF significantly improves the stiffness of regular PETG while enhancing both strength and toughness, making it an all-rounder in mechanical properties among basic filaments, perfect for load-bearing and functional parts. The new formula also greatly reduces clumping and stringing compared to regular PETG. It delivers a signature carbon fiber texture with a glossier finish than Bambu PLA-CF.\u003c\/p\u003e\n\u003csection class=\"container content\"\u003e\n\u003cdiv class=\"halves\"\u003e\n\u003cdiv class=\"block\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eFeatures\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eLess Clumping and Stringing\u003c\/li\u003e\n\u003cli\u003ePremium Print Surface\u003c\/li\u003e\n\u003cli\u003eImproved Mechanical Properties \u0026amp; High Flexibility\u003c\/li\u003e\n\u003cli\u003eComes with Basic Reusable Spool\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm +\/- 0.03mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"block\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eCautions for use\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e0.2 mm Nozzle Not Compatible\u003c\/li\u003e\n\u003cli\u003eStainless Steel Nozzle Not Recommended\u003c\/li\u003e\n\u003cli\u003eDry before Use for the Highest Print Quality\u003c\/li\u003e\n\u003cli\u003eAMS Compatible\u003c\/li\u003e\n\u003cli\u003eAMS lite NOT Compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/PETG_-_CF_Banner.png?v=1761946457\" style=\"width: 100%;\"\u003e\n\u003ch3\u003eEnhanced Strength and Stiffness\u003c\/h3\u003e\n\u003cp\u003eWith the addition of carbon fiber, Bambu PETG-CF overcomes the low stiffness of regular PETG and delivers improved strength and toughness, making it a solid choice for structural and load-bearing parts.\u003c\/p\u003e\n\u003cdiv class=\"halves\"\u003e\n\u003cdiv class=\"block\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/PETG_CF_Phone_holder.png?v=1761946319\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"block\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/PETG_CF_Tumbler_holder.png?v=1761946427\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/PETG_CF_Strength.png?v=1761946113\" style=\"width: 100%;\"\u003e\n\u003ch3\u003eReady for Outdoor Use\u003c\/h3\u003e\n\u003cp\u003eThanks to its enhanced resistance to heat and moisture, Bambu PETG-CF is ideal for outdoor applications. Feel free to create durable tools for your garden or any outdoor environment.\u003c\/p\u003e\n\u003cdiv class=\"halves\"\u003e\n\u003cdiv class=\"block\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/PETG_CF_Bottle_holder.png?v=1761946483\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"block\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/PETG_CF_Carabiner.png?v=1761946483\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eCarbon Fiber Finish with a Glossier Look\u003c\/h3\u003e\n\u003cp\u003eBambu PETG-CF features a carbon fiber texture that conceals layer lines, while its surface finish is glossier than that of PLA-CF, making it as attractive as it is functional.\u003c\/p\u003e\n\u003cimg\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eAccessory Compatiblity\u003c\/div\u003e\n\u003ctable style=\"margin-left: auto; margin-right: auto; width: 100%; height: 137.156px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 10.8036%; height: 19.5938px;\"\u003e\u003c\/th\u003e\n\u003cth style=\"width: 49.7545%; height: 19.5938px;\"\u003eRecommended\u003c\/th\u003e\n\u003cth style=\"width: 35.5134%; height: 19.5938px;\"\u003eNot Recommended\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 10.8036%; height: 39.1875px;\"\u003eBuild Plate\u003c\/td\u003e\n\u003ctd style=\"width: 49.7545%; height: 39.1875px;\"\u003eCool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate\u003c\/td\u003e\n\u003ctd style=\"width: 35.5134%; height: 39.1875px;\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 10.8036%; height: 39.1875px;\"\u003eHotend\u003c\/td\u003e\n\u003ctd style=\"width: 49.7545%; height: 39.1875px;\"\u003eHotend with Hardened Steel Nozzle 0.4 mm \/ 0.6 mm \/ 0.8 mm\u003c\/td\u003e\n\u003ctd style=\"width: 35.5134%; height: 39.1875px;\"\u003eHotend with Stainless Steel Nozzle All Size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 10.8036%; height: 39.1875px;\"\u003eAMS Series\u003c\/td\u003e\n\u003ctd style=\"width: 49.7545%; height: 39.1875px;\"\u003eAMS, AMS 2 Pro, AMS HT\u003c\/td\u003e\n\u003ctd style=\"width: 35.5134%; height: 39.1875px;\"\u003eAMS lite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"product-heading-bar\"\u003ePrinting Tips\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying Required:\u003c\/strong\u003e Bambu PETG-CF must be properly dried before printing. In a blast drying oven: 65°C for 8 hours; In an AMS 2 Pro and AMS HT: 65°C, 8 hours; On an X1 printer's heatbed: 75°C to 85°C for 12 hours. Store in a dry environment after use. For more details, please refer to: Filament drying instructions on WIKI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Recommendation:\u003c\/strong\u003e Due to the addition of carbon fiber, PETG-CF requires a more wear-resistant hardened steel nozzle. While a 0.4 mm hardened steel nozzle can be used, a 0.6 mm hardened steel nozzle is recommended to further reduce the risk of clogging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZ-Axis Strength:\u003c\/strong\u003e For stronger Z-axis adhesion, increase the infill density. Avoid using an open-frame printer and refrain from setting the cooling fan speed too high, as overcooling can weaken layer bonding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Finish:\u003c\/strong\u003e For a shinier appearance, use lower printing speeds and slightly higher nozzle temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefill Guide:\u003c\/strong\u003e The refill filament needs to be used with a spool. For detailed instructions on how to swap in the new filament using the Bambu Reusable Spool, please refer to the guide on WIKI.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","brand":"Bambu Lab","offers":[{"title":"Black","offer_id":47424854786262,"sku":"G50-K0-1.75-1000-SPL","price":44.99,"currency_code":"CAD","in_stock":false},{"title":"Titan Gray","offer_id":47424863437014,"sku":"G50-D6-1.75-1000-SPL","price":44.99,"currency_code":"CAD","in_stock":false},{"title":"Indigo Blue","offer_id":47424863469782,"sku":"G50-B6-1.75-1000-SPL","price":44.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/BambuPETG-CF-Black.jpg?v=1762197649"},{"product_id":"bambu-lab-asa-filament-1-75mm-1kg-1","title":"Bambu Lab - ASA Filament (1.75mm) 1kg","description":"\u003c!-- Short Description--\u003e\n\u003cp\u003e\u003cb\u003eBambu Lab ASA Filament\u003c\/b\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBambu ASA is a highly durable material that offers exceptional UV, weather, mechanical, and thermal resistance. Its unique combination of properties makes it an ideal material for printing outdoor models (plant signs, mailboxes, wind vanes, etc.) and structural parts that require long-term exposure to challenging outdoor conditions.\u003c\/p\u003e\n\u003c!-- Tech Specs \/ In Box--\u003e\n\u003cdiv class=\"section clearfix\"\u003e\n\u003cdiv class=\"one-half-first\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"one-half-last\"\u003e\n\u003cdiv class=\"product-description-block\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Bambu Lab","offers":[{"title":"Black","offer_id":47618587689174,"sku":"B01-K0-1.75-1000-spl","price":38.99,"currency_code":"CAD","in_stock":true},{"title":"White","offer_id":47618587721942,"sku":"B01-W0-1.75-1000-spl","price":38.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/black_1000x_980df9eb-2f52-415d-b105-5e5c6cd593f3.webp?v=1697573601"},{"product_id":"bambu-lab-pps-cf-1-75mm-1kg","title":"Bambu Lab - PPS-CF (1.75mm) 0.75kg","description":"\u003cp\u003e\u003cb\u003eBambu Lab - PPS-CF (1.75mm) 0.75kg\u003c\/b\u003e\u003c\/p\u003e\n\u003csection class=\"container content\"\u003e\n\u003cp\u003ePPS-CF is a composite material made from carbon fiber-reinforced polyphenylene sulfide. The combination of PPS resin and carbon fiber gives PPS-CF exceptional properties, including excellent resistance to solvents, corrosion, heat, and flames. Additionally, it offers superior strength, stiffness, and dimensional stability, making it a specialized engineering plastic that meets the demands of unique and challenging applications.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/PPS-CF_Banner.jpg?v=1769021021\" style=\"width: 100%;\"\u003e\n\u003ch3\u003eUltra-High Heat Resistance\u003c\/h3\u003e\n\u003cp\u003ePPS-CF boasts a heat deflection temperature of up to 264°C under 0.45 MPa and can continuously operate at temperatures exceeding 200°C. This significantly outperforms normal PA-CF materials, which have maximum temperatures around 190°C and 120°C. Its exceptional heat resistance ensures outstanding creep resistance, making PPS-CF ideal for demanding industrial environments and applications.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFilament Type\u003c\/th\u003e\n\u003cth\u003ePLA Basic\u003c\/th\u003e\n\u003cth\u003eABS\u003c\/th\u003e\n\u003cth\u003ePC\u003c\/th\u003e\n\u003cth\u003eNormal PA-CF\u003c\/th\u003e\n\u003cth\u003ePA6-CF\u003c\/th\u003e\n\u003cth\u003ePET-CF\u003c\/th\u003e\n\u003cth\u003ePPA-CF\u003c\/th\u003e\n\u003cth\u003ePPS-CF\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat Deflection Temperature \/ ℃ (0.45 MPa)\u003c\/td\u003e\n\u003ctd\u003e57 ℃\u003c\/td\u003e\n\u003ctd\u003e87 ℃\u003c\/td\u003e\n\u003ctd\u003e117 ℃\u003c\/td\u003e\n\u003ctd\u003e184 ℃\u003c\/td\u003e\n\u003ctd\u003e186 ℃\u003c\/td\u003e\n\u003ctd\u003e205 ℃\u003c\/td\u003e\n\u003ctd\u003e227 ℃\u003c\/td\u003e\n\u003ctd\u003e264 ℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSuperior Flame Retardancy\u003c\/h3\u003e\n\u003cp\u003ePPS-CF achieves a UL-94 V-0 flame retardant rating, offering superior safety and reliability in critical areas such as electronics and automotive components. PPS-CF provides long-lasting durability and peace of mind even in the most demanding environments.\u003c\/p\u003e\n\u003ch3\u003eUnmatched Mechanical Properties\u003c\/h3\u003e\n\u003cp\u003eCombining the stiffness of PPS polymers with the reinforcing power of carbon fiber, PPS-CF offers exceptional stiffness, bending strength, and tensile strength. Its superior dimensional stability and resistance to warping ensure that large-scale prints maintain precision and avoid deformation during the printing process, making it perfect for high-precision applications.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003ePET-CF\u003c\/th\u003e\n\u003cth\u003ePPS-CF\u003c\/th\u003e\n\u003cth\u003eImproved %\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStiffness (Bending Modulus - XY, Dry State)\u003c\/td\u003e\n\u003ctd\u003e5320 MPa\u003c\/td\u003e\n\u003ctd\u003e7160 MPa\u003c\/td\u003e\n\u003ctd\u003e34.59%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrength (Bending Strength - XY, Dry State)\u003c\/td\u003e\n\u003ctd\u003e131 MPa\u003c\/td\u003e\n\u003ctd\u003e142 MPa\u003c\/td\u003e\n\u003ctd\u003e8.40%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSolvent and Chemical Resistance\u003c\/h3\u003e\n\u003cp\u003ePPS-CF offers outstanding solvent and chemical resistance, second only to PTFE (Teflon). It remains virtually insoluble in any solvent below 200°C and exhibits exceptional resistance to acids, bases, and salts under normal conditions. This makes PPS-CF the ideal choice for challenging environments where chemical stability is critical.\u003c\/p\u003e\n\u003ch3\u003eUltra-Low Water Absorption\u003c\/h3\u003e\n\u003cp\u003eWith an extremely low moisture absorption rate of just 0.05%, PPS-CF ensures that its mechanical and thermal properties remain stable even in humid conditions. Unlike normal PA-CF, which can soften and degrade when exposed to moisture, PPS-CF maintains its strength and durability, making it the superior option for applications requiring high moisture resistance.\u003c\/p\u003e\n\u003ch3\u003eParameters Comparison\u003c\/h3\u003e\n\u003ctable style=\"margin-left: auto; margin-right: auto;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003ePPS-CF\u003c\/th\u003e\n\u003cth\u003ePET-CF\u003c\/th\u003e\n\u003cth\u003ePA6-CF\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS),\u003cbr\u003eCarbon Fiber\u003c\/td\u003e\n\u003ctd\u003ePolyethylene terephthalate (PET),\u003cbr\u003eCarbon Fiber\u003c\/td\u003e\n\u003ctd\u003eNylon6 (PA6),\u003cbr\u003eCarbon Fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAMS \u0026amp; AMS lite Compatibility\u003c\/td\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry before Use\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSealed during Printing\u003c\/td\u003e\n\u003ctd\u003eSealed with desiccant\u003c\/td\u003e\n\u003ctd\u003eSealed with desiccant\u003c\/td\u003e\n\u003ctd\u003eSealed with desiccant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrinter Type\u003c\/td\u003e\n\u003ctd\u003eEnclosed\u003c\/td\u003e\n\u003ctd\u003eEnclosed (Recommended) \/ Open-frame\u003c\/td\u003e\n\u003ctd\u003eEnclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003eHardened Steel 0.6 mm (recommended)\u003cbr\u003e\/ 0.4 mm \/ 0.8 mm\u003c\/td\u003e\n\u003ctd\u003eHardened Steel 0.6 mm (recommended)\u003cbr\u003e\/ 0.4 mm \/ 0.8 mm\u003c\/td\u003e\n\u003ctd\u003eHardened Steel 0.6 mm (recommended)\u003cbr\u003e\/ 0.4 mm \/ 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd\u003e310 - 340 ℃\u003c\/td\u003e\n\u003ctd\u003e260 - 300 ℃\u003c\/td\u003e\n\u003ctd\u003e260 - 300 ℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBed Temperature\u003c\/td\u003e\n\u003ctd\u003e100 - 120 ℃\u003c\/td\u003e\n\u003ctd\u003e80 - 110 ℃\u003c\/td\u003e\n\u003ctd\u003e100 - 110 ℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToughness (Impact Strength - XY, Dry State)\u003c\/td\u003e\n\u003ctd\u003e27.8 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003e36.0 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003e40.3 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToughness (Impact Strength - XY, Wet State)\u003c\/td\u003e\n\u003ctd\u003e27.8 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003e37.3 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003e57.2 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrength (Bending Strength - XY, Dry State)\u003c\/td\u003e\n\u003ctd\u003e142 MPa\u003c\/td\u003e\n\u003ctd\u003e131 MPa\u003c\/td\u003e\n\u003ctd\u003e151 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrength (Bending Strength - XY, Wet State)\u003c\/td\u003e\n\u003ctd\u003e142 MPa\u003c\/td\u003e\n\u003ctd\u003e127 MPa\u003c\/td\u003e\n\u003ctd\u003e95 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Strength (Bending Strength - Z, Dry State)\u003c\/td\u003e\n\u003ctd\u003e36 MPa\u003c\/td\u003e\n\u003ctd\u003e49 MPa\u003c\/td\u003e\n\u003ctd\u003e80 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Strength (Bending Strength - Z, Wet State)\u003c\/td\u003e\n\u003ctd\u003e36 MPa\u003c\/td\u003e\n\u003ctd\u003e46 MPa\u003c\/td\u003e\n\u003ctd\u003e45 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStiffness (Bending Modulus - XY, Dry State)\u003c\/td\u003e\n\u003ctd\u003e7160 MPa\u003c\/td\u003e\n\u003ctd\u003e5320 MPa\u003c\/td\u003e\n\u003ctd\u003e5460 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStiffness (Bending Modulus - XY, Wet State)\u003c\/td\u003e\n\u003ctd\u003e7160 MPa\u003c\/td\u003e\n\u003ctd\u003e5240 MPa\u003c\/td\u003e\n\u003ctd\u003e3560 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayer Adhesion (Impact Strength - Z, Dry State)\u003c\/td\u003e\n\u003ctd\u003e2.8 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003e4.5 kJ\/m²\u003c\/td\u003e\n\u003ctd\u003e15.5 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat Resistance (HDT, 0.45 MPa, Dry State)\u003c\/td\u003e\n\u003ctd\u003e264 ℃\u003c\/td\u003e\n\u003ctd\u003e205 ℃\u003c\/td\u003e\n\u003ctd\u003e186 ℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSaturated Water Absorption Rate (25 °C, 55% RH)\u003c\/td\u003e\n\u003ctd\u003e0.05%\u003c\/td\u003e\n\u003ctd\u003e0.37%\u003c\/td\u003e\n\u003ctd\u003e2.35%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eAccessory Compatibility\u003c\/h3\u003e\n\u003ctable style=\"margin-left: auto; margin-right: auto;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003cth\u003eRecommended\u003c\/th\u003e\n\u003cth\u003eNot Recommended\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Plate\u003c\/td\u003e\n\u003ctd\u003eSmooth PEI Plate, Textured PEI Plate\u003c\/td\u003e\n\u003ctd\u003eCool Plate SuperTack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHotend\u003c\/td\u003e\n\u003ctd\u003eHotend with Hardened Steel 0.4 mm \/ 0.6 mm (recommended) \/ 0.8 mm\u003c\/td\u003e\n\u003ctd\u003eHotend with Stainless Steel Nozzle (All Sizes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlue\u003c\/td\u003e\n\u003ctd\u003eBambu Glue Stick\u003c\/td\u003e\n\u003ctd\u003eBambu Liquid Glue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAMS \u0026amp; AMS lite\u003c\/td\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003ctd\u003eAMS \u0026amp; AMS lite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"thirds\"\u003e\n\u003cdiv class=\"block\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eRecommended Printing Settings\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eDrying Settings before Printing: 100 - 140 °C, 8 - 12 h\u003c\/li\u003e\n\u003cli\u003ePrinting and Keeping Container's Humidity: \u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/li\u003e\n\u003cli\u003eNozzle Temperature: 310 - 340 °C\u003c\/li\u003e\n\u003cli\u003eBed Temperature (with Glue): 100 - 120 °C\u003c\/li\u003e\n\u003cli\u003ePrinting Speed: \u0026lt; 100 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"block\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003ePhysical Properties\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eDensity: 1.26 g\/cm³\u003c\/li\u003e\n\u003cli\u003eVicat Softening Temperature: 268 °C\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature: 264 °C\u003c\/li\u003e\n\u003cli\u003eMelting Temperature: 284 °C\u003c\/li\u003e\n\u003cli\u003eMelt Index: 11.48 ± 1.23 g\/10 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"block\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eMechanical Properties\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eTensile Strength: 87 ± 5 MPa\u003c\/li\u003e\n\u003cli\u003eBreaking Elongation Rate: 1.2 ± 0.4 %\u003c\/li\u003e\n\u003cli\u003eBending Modulus: 7160 ± 280 MPa\u003c\/li\u003e\n\u003cli\u003eBending Strength: 142 ± 5 MPa\u003c\/li\u003e\n\u003cli\u003eImpact Strength: 27.8 ± 2.3 kJ\/m²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":47749961842902,"sku":"T02-K0-1.75-750-SPL","price":165.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/PPS-CF.png?v=1769017617"},{"product_id":"bambu-lab-pa6-gf-1-75mm-1kg","title":"Bambu Lab PA6-GF (1.75mm) 1kg","description":"\u003cb\u003e Bambu PA6-GF - Glass Fiber Reinforced Nylon \u003c\/b\u003e\n\u003cp\u003eBambu PA6-GF, also known as Nylon 6 with Glass Fiber, stands at the forefront of high-performance engineering plastics. Engineered to deliver exceptional strength, durability, dimensional stability. The PA6-GF is also more cost effective when compared to other top tier engineering filaments.\u003c\/p\u003e\n\u003csection class=\"container content\"\u003e \n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/pa6gf_banner.jpg?v=1769113525\" style=\"width:100%\"\u003e\n  \u003ch3\u003e Built to last \u003c\/h3\u003e\n  \u003cp\u003eBambu PA6-GF is exceptionally strong and durable due to reinforced glass fibers, making it the perfect choice for prints that need to withstand heavy use and resist bending or breaking.\n\n* Note: The printed part achieves better toughness after exposure to moisture.\u003c\/p\u003e\n\n  \u003cdiv class=\"halves\"\u003e \n\u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/pa6gf_project_1.jpg?v=1769113529\" style=\"width:100%\"\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/pa6gf_project_2.png?v=1769113533\" style=\"width:100%\"\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003ch3\u003eDimensional Stability \u003c\/h3\u003e\n  \u003cp\u003ePA6-GF boasts unparalleled dimensional stability thanks to its glass fiber reinforcement, minimizing warping in comparison to standard PA filaments. Print with precise dimensions, even in the most intricate geometries.\u003c\/p\u003e\n   \u003cdiv class=\"halves\"\u003e \n\u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/pa6gf_project_3.jpg?v=1769113525\" style=\"width:100%\"\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/pa6gf_project_4.jpg?v=1769113525\" style=\"width:100%\"\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003ch3\u003e Exceptional Thermal Properties \u003c\/h3\u003e\n  \u003cp\u003ePA6-GF boasts a high heat deflection temperature and superior dimensional stability, enabling it to retain its mechanical properties even under elevated temperatures. This makes it ideal for demanding industrial and automotive applications.\u003c\/p\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/pa6gf_project_5.jpg?v=1769113527\" style=\"width:100%;\"\u003e\n  \u003ctable style=\"margin-left:auto; margin-right:auto;\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003eFilament Type\u003c\/th\u003e\n    \u003cth\u003ePLA Basic\u003c\/th\u003e\n    \u003cth\u003eABS\u003c\/th\u003e\n    \u003cth\u003eNormal PA\u003c\/th\u003e\n    \u003cth\u003ePC\u003c\/th\u003e\n    \u003cth\u003ePA6-GF\u003c\/th\u003e\n    \u003cth\u003ePA6-CF\u003c\/th\u003e\n    \u003cth\u003ePAHT-CF\u003c\/th\u003e\n    \u003cth\u003ePET-CF\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eHeat Deflection Temperature \/ ℃ (0.45 MPa)\u003c\/td\u003e\n    \u003ctd\u003e57 ℃\u003c\/td\u003e\n    \u003ctd\u003e87 ℃\u003c\/td\u003e\n    \u003ctd\u003e89 ℃\u003c\/td\u003e\n    \u003ctd\u003e117 ℃\u003c\/td\u003e\n    \u003ctd\u003e182 ℃\u003c\/td\u003e\n    \u003ctd\u003e186 ℃\u003c\/td\u003e\n    \u003ctd\u003e194 ℃\u003c\/td\u003e\n    \u003ctd\u003e205 ℃\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/pa6gf_temps.jpg?v=1769113526\" style=\"width:100%;\"\u003e\n  \u003ch3\u003e Chemical Resistance \u003c\/h3\u003e\n  \u003cp\u003ePA6-GF offers excellent resistance to chemicals, oils, and many kinds of solvents, ensuring long-term performance in challenging environments.\u003c\/p\u003e\n   \u003cdiv class=\"halves\"\u003e \n\u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/pa6gf_project_6.jpg?v=1769113523\" style=\"width:100%\"\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/pa6gf_project_7.jpg?v=1769113524\" style=\"width:100%\"\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003ch3\u003e Smooth Surface and More Colors \u003c\/h3\u003e \n  \u003cp\u003eBambu PA6-GF filaments are compatible with the Bambu AMS system, ready to print in multi-color. The special surface texture also blurs the layer lines, providing a smooth surface quality.\u003c\/p\u003e\n   \u003cdiv class=\"halves\"\u003e \n\u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/pa6gf_project_8.jpg?v=1769113526\" style=\"width:100%\"\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/pa6gf_project_9.jpg?v=1769113525\" style=\"width:100%\"\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003ch3\u003e Parameters Comparison \u003c\/h3\u003e\n  \u003ctable style=\"margin-left:auto; margin-right:auto;\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003e\u003c\/th\u003e\n    \u003cth\u003ePA6-GF\u003c\/th\u003e\n    \u003cth\u003ePA6-CF\u003c\/th\u003e\n    \u003cth\u003ePAHT-CF\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eComposition\u003c\/td\u003e\n    \u003ctd\u003ePA6, glass fiber\u003c\/td\u003e\n    \u003ctd\u003ePA6, carbon fiber\u003c\/td\u003e\n    \u003ctd\u003ePA12 and other long-chain PA, carbon fiber\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eAMS Compatibility\u003c\/td\u003e\n    \u003ctd\u003eYES\u003c\/td\u003e\n    \u003ctd\u003eNO\u003c\/td\u003e\n    \u003ctd\u003eYES\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eDry Out Before Use\u003c\/td\u003e\n    \u003ctd\u003eRequired\u003c\/td\u003e\n    \u003ctd\u003eRequired\u003c\/td\u003e\n    \u003ctd\u003eRequired\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003ePrinting Speed\u003c\/td\u003e\n    \u003ctd\u003e\u0026lt; 130 mm\/s\u003c\/td\u003e\n    \u003ctd\u003e\u0026lt; 100 mm\/s\u003c\/td\u003e\n    \u003ctd\u003e\u0026lt; 100 mm\/s\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003ePrinter Type\u003c\/td\u003e\n    \u003ctd\u003eEnclosure\u003c\/td\u003e\n    \u003ctd\u003eEnclosure\u003c\/td\u003e\n    \u003ctd\u003eEnclosure\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eToughness (Impact Strength - XY, dry state)\u003c\/td\u003e\n    \u003ctd\u003e27.2 kJ\/m²\u003c\/td\u003e\n    \u003ctd\u003e40.3 kJ\/m²\u003c\/td\u003e\n    \u003ctd\u003e57.5 kJ\/m²\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eToughness (Impact Strength - XY, wet state)\u003c\/td\u003e\n    \u003ctd\u003e55.8 kJ\/m²\u003c\/td\u003e\n    \u003ctd\u003e57.2 kJ\/m²\u003c\/td\u003e\n    \u003ctd\u003e62.3 kJ\/m²\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eStrength (Bending Strength - XY, dry state)\u003c\/td\u003e\n    \u003ctd\u003e120 MPa\u003c\/td\u003e\n    \u003ctd\u003e151 MPa\u003c\/td\u003e\n    \u003ctd\u003e125 MPa\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eStrength (Bending Strength - XY, wet state)\u003c\/td\u003e\n    \u003ctd\u003e71 MPa\u003c\/td\u003e\n    \u003ctd\u003e95 MPa\u003c\/td\u003e\n    \u003ctd\u003e115 MPa\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eLayer Strength (Bending Strength - Z, dry state)\u003c\/td\u003e\n    \u003ctd\u003e51 MPa\u003c\/td\u003e\n    \u003ctd\u003e80 MPa\u003c\/td\u003e\n    \u003ctd\u003e61 MPa\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eLayer Strength (Bending Strength - Z, wet state)\u003c\/td\u003e\n    \u003ctd\u003e33 MPa\u003c\/td\u003e\n    \u003ctd\u003e45 MPa\u003c\/td\u003e\n    \u003ctd\u003e49 MPa\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eStiffness (Bending Modulus - XY, dry state)\u003c\/td\u003e\n    \u003ctd\u003e3670 MPa\u003c\/td\u003e\n    \u003ctd\u003e5460 MPa\u003c\/td\u003e\n    \u003ctd\u003e4230 MPa\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eStiffness (Bending Modulus - XY, wet state)\u003c\/td\u003e\n    \u003ctd\u003e2120 MPa\u003c\/td\u003e\n    \u003ctd\u003e3560 MPa\u003c\/td\u003e\n    \u003ctd\u003e3640 MPa\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eLayer Adhesion (Impact Strength - Z, dry state)\u003c\/td\u003e\n    \u003ctd\u003e4.1 kJ\/m²\u003c\/td\u003e\n    \u003ctd\u003e15.5 kJ\/m²\u003c\/td\u003e\n    \u003ctd\u003e13.3 kJ\/m²\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eHeat Resistance (HDT, 0.45 MPa, Dry State)\u003c\/td\u003e\n    \u003ctd\u003e182 ℃\u003c\/td\u003e\n    \u003ctd\u003e186 ℃\u003c\/td\u003e\n    \u003ctd\u003e194 ℃\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eSaturated Water Absorption Rate \/ % (25 ℃, 55% RH)\u003c\/td\u003e\n    \u003ctd\u003e2.56\u003c\/td\u003e\n    \u003ctd\u003e2.35\u003c\/td\u003e\n    \u003ctd\u003e0.88\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n  \u003ch3\u003e Accessory Compatibility \u003c\/h3\u003e\n  \u003ctable style=\"margin-left:auto; margin-right:auto;\"\u003e\n  \u003ctr\u003e\n    \u003cth\u003e\u003c\/th\u003e\n    \u003cth\u003eRecommended\u003c\/th\u003e\n    \u003cth\u003eNot Recommended\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eBuild Plate\u003c\/td\u003e\n    \u003ctd\u003e\n      Smooth PEI Plate, Textured PEI Plate\u003cbr\u003e\n      Cool Plate SuperTack\n    \u003c\/td\u003e\n    \u003ctd\u003e\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eHotend\u003c\/td\u003e\n    \u003ctd\u003eHotend with Hardened Steel 0.4mm \/ 0.6mm (recommended) \/ 0.8 mm\u003c\/td\u003e\n    \u003ctd\u003eHotend with Stainless Steel Nozzle All Size\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eGlue\u003c\/td\u003e\n    \u003ctd\u003eBambu Glue Stick\u003c\/td\u003e\n    \u003ctd\u003eBambu Liquid Glue\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003eAMS \u0026amp; AMS lite\u003c\/td\u003e\n    \u003ctd\u003eAMS\u003c\/td\u003e\n    \u003ctd\u003eAMS lite\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"thirds\"\u003e\n\n  \u003cdiv class=\"block\"\u003e\n    \u003cdiv class=\"product-heading-bar\"\u003eRecommended Printing Settings\u003c\/div\u003e\n    \u003cul\u003e\n      \u003cli\u003eDrying Settings before Printing: 80 °C, 8 – 12 h\u003c\/li\u003e\n      \u003cli\u003ePrinting and Keeping Container's Humidity: \u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/li\u003e\n      \u003cli\u003eNozzle Temperature: 260 – 290 °C\u003c\/li\u003e\n      \u003cli\u003eBed Temperature (with Glue): 80 – 100 °C\u003c\/li\u003e\n      \u003cli\u003ePrinting Speed: \u0026lt; 130 mm\/s\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"block\"\u003e\n    \u003cdiv class=\"product-heading-bar\"\u003ePhysical Properties\u003c\/div\u003e\n    \u003cul\u003e\n      \u003cli\u003eDensity: 1.14 g\/cm³\u003c\/li\u003e\n      \u003cli\u003eVicat Softening Temperature: 210 °C\u003c\/li\u003e\n      \u003cli\u003eHeat Deflection Temperature: 182 °C\u003c\/li\u003e\n      \u003cli\u003eMelting Temperature: 219 °C\u003c\/li\u003e\n      \u003cli\u003eMelt Index: 9.0 ± 0.8 g\/10 min\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"block\"\u003e\n    \u003cdiv class=\"product-heading-bar\"\u003eMechanical Properties\u003c\/div\u003e\n    \u003cul\u003e\n      \u003cli\u003eTensile Strength: 75 ± 6 MPa\u003c\/li\u003e\n      \u003cli\u003eBreaking Elongation Rate: 3.9 ± 0.8 %\u003c\/li\u003e\n      \u003cli\u003eBending Modulus: 3670 ± 140 MPa\u003c\/li\u003e\n      \u003cli\u003eBending Strength: 120 ± 6 MPa\u003c\/li\u003e\n      \u003cli\u003eImpact Strength: 27.2 ± 2.2 kJ\/m²\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\n\u003c\/section\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":47757178962134,"sku":"N08-K0-1.75-1000-SPL","price":101.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/pa6gf.jpg?v=1769113906"},{"product_id":"bambu-lab-abs-gf-1-75mm-1kg","title":"Bambu Lab - ABS-GF (1.75mm) 1kg","description":"\u003cb\u003e Bambu Lab ABS-GF \u003c\/b\u003e\n\u003cp\u003eBambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping. Glass fiber imparts a smooth matte finish with micro-spot gloss, blurring layer lines. ABS-GF is ideal for both mechanical parts and decorations due to the inherited water resistance, wear resistance, durability and vibrant colors.\u003c\/p\u003e\n\u003csection class=\"container content\"\u003e \n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/ABSGF_Banner.png?v=1769198536\" style=\"width:100%;\"\u003e\n  \n\u003ch3\u003e Enhanced Strength and Stiffness \u003c\/h3\u003e\n  \u003cp\u003e ABS-GF outclasses regular ABS in strength and stiffness, making it perfect for load-bearing and bending-resistance parts.\n  \u003c\/p\u003e\n  \u003cdiv class=\"halves\"\u003e \n    \n\u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/basgf_project_1.png?v=1769198524\" style=\"width:100%;\"\u003e\n\u003c\/div\u003e\n\n    \u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/basgf_project_2.png?v=1769198525\" style=\"width:100%;\"\u003e\n\u003c\/div\u003e\n \u003c\/div\u003e\n\u003ctable style=\"margin-left:auto; margin-right:auto;\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProperty\u003c\/th\u003e\n      \u003cth\u003eABS\u003c\/th\u003e\n      \u003cth\u003eABS-GF\u003c\/th\u003e\n      \u003cth\u003eImprovement %\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStiffness (Bending Modulus - XY)\u003c\/td\u003e\n      \u003ctd\u003e1880 MPa\u003c\/td\u003e\n      \u003ctd\u003e2860 MPa\u003c\/td\u003e\n      \u003ctd\u003e52.1%\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStrength (Bending Strength - XY)\u003c\/td\u003e\n      \u003ctd\u003e64 MPa\u003c\/td\u003e\n      \u003ctd\u003e68 MPa\u003c\/td\u003e\n      \u003ctd\u003e6.3%\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLayer Strength (Bending Strength - Z)\u003c\/td\u003e\n      \u003ctd\u003e39 MPa\u003c\/td\u003e\n      \u003ctd\u003e46 MPa\u003c\/td\u003e\n      \u003ctd\u003e17.9%\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHeat Resistance (HDT, 0.45 MPa)\u003c\/td\u003e\n      \u003ctd\u003e87 °C\u003c\/td\u003e\n      \u003ctd\u003e99 °C\u003c\/td\u003e\n      \u003ctd\u003e13.8%\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e Greater Dimensional Stability\u003c\/h3\u003e\n  \u003cp\u003eGlass fiber reinforcement gives ABS-GF better dimensional stability than regular ABS, minimizing warping and deformation during printing. This makes it ideal for intricate mechanical assembly parts or geometric components.\u003c\/p\u003e\n   \u003cdiv class=\"halves\"\u003e \n    \n\u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/abs_vs_1.jpg?v=1769198518\" style=\"width:100%;\"\u003e\n\u003c\/div\u003e\n\n    \u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/abs_vs_2.jpg?v=1769198520\" style=\"width:100%;\"\u003e\n\u003c\/div\u003e\n \u003c\/div\u003e\n  \u003cp\u003eSpecimen Test: Model size (L*W*H): 240*50*20 mm³ (the XY direction); Infill Density: 25%\u003c\/p\u003e\n     \u003cdiv class=\"halves\"\u003e \n    \n\u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/basgf_project_3.png?v=1769198534\" style=\"width:100%;\"\u003e\n\u003c\/div\u003e\n\n    \u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/basgf_project_4.png?v=1769198532\" style=\"width:100%;\"\u003e\n\u003c\/div\u003e\n \u003c\/div\u003e\n  \u003ch3\u003e Fine Matte Finish\u003c\/h3\u003e\n  \u003cp\u003eThe seamless matte finish, coupled with nearly invisible layer lines, gives ABS-GF a smooth appearance, making it ideal for decorative and fine-grained parts.\u003c\/p\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/absgf_surface_finish.jpg?v=1769198523\" style=\"width:100%;\"\u003e\n  \u003ch3\u003e Water Resistance \u0026amp; Built to Last\u003c\/h3\u003e\n  \u003cp\u003eWith improved water resistance and durability, Bambu ABS-GF is ideal for printing long-lasting production and household items, like mechanical casings, connectors and molds.\u003c\/p\u003e\n       \u003cdiv class=\"halves\"\u003e \n    \n\u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/absgf_project_5.png?v=1769198532\" style=\"width:100%;\"\u003e\n\u003c\/div\u003e\n\n    \u003cdiv class=\"block\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/absgf_project_6.png?v=1769198530\" style=\"width:100%;\"\u003e\n\u003c\/div\u003e\n \u003c\/div\u003e\n  \u003ch3\u003e Accessory Compatibility\u003c\/h3\u003e\n  \u003ctable style=\"margin-left:auto; margin-right:auto;\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003e\u003c\/th\u003e\n      \u003cth\u003eRecommended\u003c\/th\u003e\n      \u003cth\u003eNot Recommended\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBuild Plate\u003c\/td\u003e\n      \u003ctd\u003eSmooth PEI Plate, Textured PEI Plate\u003c\/td\u003e\n      \u003ctd\u003eCool Plate SuperTack\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHotend\u003c\/td\u003e\n      \u003ctd\u003eHotend with Hardened Steel 0.4mm \/ 0.6mm (recommended) \/ 0.8mm\u003c\/td\u003e\n      \u003ctd\u003eHotend with Stainless Steel Nozzle (All Sizes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eGlue\u003c\/td\u003e\n      \u003ctd\u003eBambu Liquid Glue\u003c\/td\u003e\n      \u003ctd\u003eGlue Stick\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n  \u003ch3\u003e Parameters Comparison \u003c\/h3\u003e\n  \u003ctable style=\"margin-left:auto; margin-right:auto;\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProperty\u003c\/th\u003e\n      \u003cth\u003eABS\u003c\/th\u003e\n      \u003cth\u003eABS-GF\u003c\/th\u003e\n      \u003cth\u003ePA6-GF\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eComposition\u003c\/td\u003e\n      \u003ctd\u003eAcrylonitrile - butadiene - styrene\u003c\/td\u003e\n      \u003ctd\u003eAcrylonitrile - butadiene - styrene, glass fiber\u003c\/td\u003e\n      \u003ctd\u003ePA6, glass fiber\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAMS Compatibility\u003c\/td\u003e\n      \u003ctd\u003eYES\u003c\/td\u003e\n      \u003ctd\u003eYES\u003c\/td\u003e\n      \u003ctd\u003eYES\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDry Out Before Use\u003c\/td\u003e\n      \u003ctd\u003eRecommended\u003c\/td\u003e\n      \u003ctd\u003eRecommended\u003c\/td\u003e\n      \u003ctd\u003eRequired\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrinting Speed\u003c\/td\u003e\n      \u003ctd\u003e\u0026lt; 300 mm\/s\u003c\/td\u003e\n      \u003ctd\u003e\u0026lt; 180 mm\/s\u003c\/td\u003e\n      \u003ctd\u003e\u0026lt; 130 mm\/s\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrinter Type\u003c\/td\u003e\n      \u003ctd\u003eEnclosure\u003c\/td\u003e\n      \u003ctd\u003eEnclosure\u003c\/td\u003e\n      \u003ctd\u003eEnclosure\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eToughness (Impact Strength - XY)\u003c\/td\u003e\n      \u003ctd\u003e39.3 kJ\/m²\u003c\/td\u003e\n      \u003ctd\u003e14.5 kJ\/m²\u003c\/td\u003e\n      \u003ctd\u003e27.2 kJ\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStrength (Bending Strength - XY)\u003c\/td\u003e\n      \u003ctd\u003e62 MPa\u003c\/td\u003e\n      \u003ctd\u003e68 MPa\u003c\/td\u003e\n      \u003ctd\u003e120 MPa\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLayer Strength (Bending Strength - Z)\u003c\/td\u003e\n      \u003ctd\u003e39 MPa\u003c\/td\u003e\n      \u003ctd\u003e46 MPa\u003c\/td\u003e\n      \u003ctd\u003e51 MPa\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStiffness (Bending Modulus - XY)\u003c\/td\u003e\n      \u003ctd\u003e1880 MPa\u003c\/td\u003e\n      \u003ctd\u003e2860 MPa\u003c\/td\u003e\n      \u003ctd\u003e3670 MPa\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLayer Adhesion (Impact Strength - Z)\u003c\/td\u003e\n      \u003ctd\u003e7.4 kJ\/m²\u003c\/td\u003e\n      \u003ctd\u003e5.3 kJ\/m²\u003c\/td\u003e\n      \u003ctd\u003e4.1 kJ\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHeat Resistance (HDT, 0.45 MPa)\u003c\/td\u003e\n      \u003ctd\u003e87 °C\u003c\/td\u003e\n      \u003ctd\u003e99 °C\u003c\/td\u003e\n      \u003ctd\u003e182 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSaturated Water Absorption Rate (%) (25 °C, 55% RH)\u003c\/td\u003e\n      \u003ctd\u003e0.65\u003c\/td\u003e\n      \u003ctd\u003e0.53\u003c\/td\u003e\n      \u003ctd\u003e2.56\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"thirds\"\u003e\n  \u003cdiv class=\"block\"\u003e\n    \u003cdiv class=\"product-heading-bar\"\u003eRecommended Printing Settings\u003c\/div\u003e\n    \u003cul\u003e\n      \u003cli\u003eDrying Settings (Blast Drying Oven): 80 °C, 8 h\u003c\/li\u003e\n      \u003cli\u003ePrinting and Keeping Container's Humidity: \u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/li\u003e\n      \u003cli\u003eNozzle Temperature: 240 - 270 °C\u003c\/li\u003e\n      \u003cli\u003eBed Temperature (with Glue): 80 - 100 °C\u003c\/li\u003e\n      \u003cli\u003ePrinting Speed: \u0026lt; 180 mm\/s\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"block\"\u003e\n    \u003cdiv class=\"product-heading-bar\"\u003ePhysical Properties\u003c\/div\u003e\n    \u003cul\u003e\n      \u003cli\u003eDensity: 1.08 g\/cm³\u003c\/li\u003e\n      \u003cli\u003eVicat Softening Temperature: 103 °C\u003c\/li\u003e\n      \u003cli\u003eHeat Deflection Temperature: 99 °C\u003c\/li\u003e\n      \u003cli\u003eMelting Temperature: 202 °C\u003c\/li\u003e\n      \u003cli\u003eMelt Index: 7.56 ± 1.4 g\/10 min\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"block\"\u003e\n    \u003cdiv class=\"product-heading-bar\"\u003eMechanical Properties\u003c\/div\u003e\n    \u003cul\u003e\n      \u003cli\u003eTensile Strength: 36 ± 3 MPa\u003c\/li\u003e\n      \u003cli\u003eBreaking Elongation Rate: 6.3% ± 1.2%\u003c\/li\u003e\n      \u003cli\u003eBending Modulus: 2860 ± 130 MPa\u003c\/li\u003e\n      \u003cli\u003eBending Strength: 68 ± 4 MPa\u003c\/li\u003e\n      \u003cli\u003eImpact Strength: 14.5 ± 1.5 kJ\/m²\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\n\u003c\/section\u003e","brand":"Bambu Lab","offers":[{"title":"Black","offer_id":47765871395030,"sku":"B50-K0-1.75-1000-SPL","price":38.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/ABSGF-Black.jpg?v=1769198282"},{"product_id":"esun-3d-printing-petg-hs-1kg","title":"eSun PETG+HS (High Speed) Filament - 1.75mm - 1kg","description":"\u003cp\u003e\u003cb\u003eeSun 3D Printing PETG+HS (High Speed) Filament - 1.75mm (1kg)\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003ePETG+HS, PETG Formula Newly Optimized for Faster and Superior Cooling Solidification, Compatible with High-Speed Printing, Material Adhesion to Nozzle during Printing Issues Optimized, Reducing the Likelihood of Poor Printing, Cost-Effective, Waterproof, Chemical Resistant, High Toughness, and Fast Printing Material.\u003c\/p\u003e\n\u003csection class=\"container content\"\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eFeatures\u003c\/div\u003e\n\u003cdiv class=\"halves\"\u003e\n\u003cdiv class=\"block\"\u003e\n\u003cb\u003e Improved nozzle adhesion \u003c\/b\u003e \u003cbr\u003e\n\u003cp\u003eThis upgraded formula reduces common issues during printing such as stringing, under-extrusion. nozzle sticking and clogging\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"block\"\u003e\n\u003cb\u003e High speed printing \u003c\/b\u003e \u003cbr\u003e\n\u003cp\u003eCompatible with high-speed printing, with a printing speed of 40-600 mm\/s\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"block\"\u003e\n\u003cb\u003e Water and chemical resistant \u003c\/b\u003e \u003cbr\u003e\n\u003cp\u003eExcellent waterproof and chemical resistance, meeting the requirements of various applications\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"block\"\u003e\n\u003cb\u003e Higher toughness \u003c\/b\u003e \u003cbr\u003e\n\u003cp\u003eMaintains PETS's toughness, impact resistance and improved usabilitly\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-heading-bar\"\u003ePhysical Properties\u003c\/div\u003e\n\u003ctable style=\"margin-left: auto; margin-right: auto;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.26 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass transition temperature\u003c\/td\u003e\n\u003ctd\u003e24°C (220°C \/ 10kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection temperature\u003c\/td\u003e\n\u003ctd\u003e68°C (0.45 MPa)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eMechanical Properties\u003c\/div\u003e\n\u003ctable style=\"margin-left: auto; margin-right: auto;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (XY)\u003c\/td\u003e\n\u003ctd\u003e49.52 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (Z)\u003c\/td\u003e\n\u003ctd\u003e39.6 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break (XY)\u003c\/td\u003e\n\u003ctd\u003e8%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break (Z)\u003c\/td\u003e\n\u003ctd\u003e5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (XY)\u003c\/td\u003e\n\u003ctd\u003e70.2 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (Z)\u003c\/td\u003e\n\u003ctd\u003e46 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus (XY)\u003c\/td\u003e\n\u003ctd\u003e1915.89 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural modulus (Z)\u003c\/td\u003e\n\u003ctd\u003e1506.88 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact strength (XY)\u003c\/td\u003e\n\u003ctd\u003e6.07 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNotched impact strength (Z)\u003c\/td\u003e\n\u003ctd\u003e2.05 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"product-heading-bar\"\u003ePrinting Parameters\u003c\/div\u003e\n\u003ctable style=\"margin-left: auto; margin-right: auto; width: 99.9223%; height: 78.3484px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5871px;\"\u003e\n\u003ctd style=\"width: 61.4221%; height: 19.5871px;\"\u003ePrinting temperature\u003c\/td\u003e\n\u003ctd style=\"width: 36.4036%; height: 19.5871px;\"\u003e250–280°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5871px;\"\u003e\n\u003ctd style=\"width: 61.4221%; height: 19.5871px;\"\u003eBed temperature\u003c\/td\u003e\n\u003ctd style=\"width: 36.4036%; height: 19.5871px;\"\u003e75–90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5871px;\"\u003e\n\u003ctd style=\"width: 61.4221%; height: 19.5871px;\"\u003ePrint speed\u003c\/td\u003e\n\u003ctd style=\"width: 36.4036%; height: 19.5871px;\"\u003e\u0026lt; 600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5871px;\"\u003e\n\u003ctd style=\"width: 61.4221%; height: 19.5871px;\"\u003eFan cooling\u003c\/td\u003e\n\u003ctd style=\"width: 36.4036%; height: 19.5871px;\"\u003e100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e","brand":"eSun","offers":[{"title":"White","offer_id":47807915983062,"sku":"PETG+HS175W1Y1","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Black","offer_id":47807916015830,"sku":"PETG+HS175B1Y1","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Red","offer_id":47807916048598,"sku":"PETG+HS175R1Y1","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Blue","offer_id":47807916081366,"sku":"PETG+HS175U1Y1","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Silver","offer_id":47807916114134,"sku":"PETG+HS175S1Y1","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/PETGHS-WHITE.jpg?v=1770063840"},{"product_id":"esun-3d-printing-abs-hs-1kg","title":"eSun ABS+HS (High Speed) Filament - 1.75mm (1kg)","description":"\u003cp\u003e\u003cb\u003eeSun 3D Printing ABS+HS (High Speed) Filament - 1.75mm (1kg)\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eABS+HS is a modified version of ABS material. Compared to conventional ABS, it exhibits lower shrinkage and superior interlayer adhesion, reducing the likelihood of warping and cracking during printing. It contains low VOC (Volatile Organic Compounds) components, resulting in a reduced odor during the printing process, making it more comfortable and stress-free. This material is optimized for high-speed printing, maintaining its performance even at higher speeds, providing an excellent printing experience. Additionally, it can be acetone polished to eliminate layer lines and further enhance the print quality.\u003c\/p\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eNotes\u003c\/div\u003e\n\u003cp\u003e1. The shrinkage rate of ABS+ material is large, so you should pay attention to heat preservation when printing, and print in a printer with a closed chamber. 2. The cooling of ABS+ is slightly worse. You can turn on a fan to improve the printing effect, or reduce the drape angle structure in the model; or try to reduce the speed to print.\u003c\/p\u003e\n\u003cdiv class=\"product-heading-bar\"\u003eParameter information\u003c\/div\u003e\n\u003csection class=\"container content\"\u003e\u003cbr\u003e\n\u003ctable style=\"margin-left: auto; margin-right: auto; width: 100.034%; height: 372.309px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eDensity (g\/cm³)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e1.04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eMelt Flow Index\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e6 (220℃\/10kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eHeat Distortion Temp (℃, 0.45MPa)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e89\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eTensile Strength (MPa) (XY)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e41.64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eTensile Strength (MPa) (Z)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e27.08\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eElongation at Break (%) (XY)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e5.14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eElongation at Break (%) (Z)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e3.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eFlexural Strength (MPa) (XY)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e46\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eFlexural Strength (MPa) (Z)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e44.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eFlexural Modulus (MPa) (XY)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e2349.32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eFlexural Modulus (MPa) (Z)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e1934.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eIZOD Impact Strength (kJ\/㎡) (XY)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e25.94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eIZOD Impact Strength (kJ\/㎡) (Z)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e3.14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eExtruder Temperature (℃)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e230–270℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eBed Temperature (℃)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e95–110℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eFan Speed (%)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e0%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003ePrinting Speed (mm\/s)\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003e50–300 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003eHeated Bed\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003eNeed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5952px;\"\u003e\n\u003ctd style=\"width: 62.8061%; height: 19.5952px;\"\u003ePrinting Suggestions\u003c\/td\u003e\n\u003ctd style=\"width: 34.7957%; height: 19.5952px;\"\u003eSealed box printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e","brand":"eSun","offers":[{"title":"Black","offer_id":47808205717718,"sku":"ABS+HS175B1Y1","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Cold White","offer_id":47808244875478,"sku":"ABS+HS175C-W1Y1","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Silver","offer_id":47808244908246,"sku":"ABS+HS175S1Y1","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/ABSHS-COLD-WHITE.png?v=1770066399"},{"product_id":"esun-3d-printing-asa-filament-1-75mm-1kg","title":"eSun 3D Printing ASA+ Filament - 1.75mm (1kg)","description":"\u003cb\u003e eSun 3D Printing ASA+ Filament - 1.75mm (1kg) \u003c\/b\u003e\n\u003cp\u003eASA+ characteristics similar to ABS, but it offers better resistance to ultraviolet light and harsh weather conditions, with enhanced toughness, rigidity, and high impact resistance. Its excellent weatherability and mechanical properties enable it to better withstand the effects of environmental aging, making it commonly used for outdoor applications.\u003c\/p\u003e\n\u003csection class=\"container content\"\u003e \n  \u003cdiv class=\"product-heading-bar\"\u003e Features \u003c\/div\u003e\n\u003cdiv class=\"halves\"\u003e \n\n  \u003cdiv class=\"block\"\u003e \n\u003cb\u003e Outstanding weatherability \u003c\/b\u003e\n    \u003cp\u003e Under long-term sunlight exposure, it effectively resists UV radiation, preventing fading, yellowing or brittleness of prints. It maintains stable color and mechanical properties even in outdoor environments \u003c\/p\u003e\n  \u003c\/div\u003e \n\n\u003cdiv class=\"block\"\u003e \n\u003cb\u003e Excellent mechanical properties \u003c\/b\u003e \n  \u003cp\u003e With good impact resistance, toughness and strength. Printed parts are strong and durable \u003c\/p\u003e\n\u003c\/div\u003e\n\n  \u003cdiv class=\"block\"\u003e\n\u003cb\u003e High stability and heat resistance \u003c\/b\u003e \n    \u003cp\u003e ASA+ has a high heat distortion temperature of 96.4 C. Printed parts can maintain thier shape and functionality in high-temperature environments. ASA+ also provides strong resistance to many chemicals, oils and acidic or alkaline substances \u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv class=\"product-heading-bar\"\u003eProperties \u003c\/div\u003e\n  \u003cdiv class=\"thirds\"\u003e\n\n    \u003cdiv class=\"block\"\u003e\n  \u003cstrong\u003eMechanical Properties\u003c\/strong\u003e\n  \u003cul\u003e\n    \u003cli\u003eTensile strength (XY): 37.36 MPa\u003c\/li\u003e\n    \u003cli\u003eTensile strength (Z): 32.36 MPa\u003c\/li\u003e\n    \u003cli\u003eElongation at break (XY): 5.39%\u003c\/li\u003e\n    \u003cli\u003eElongation at break (Z): 2.73%\u003c\/li\u003e\n    \u003cli\u003eFlexural strength (XY): 57.4 MPa\u003c\/li\u003e\n    \u003cli\u003eFlexural strength (Z): 35.3 MPa\u003c\/li\u003e\n    \u003cli\u003eFlexural modulus (XY): 1849 MPa\u003c\/li\u003e\n    \u003cli\u003eFlexural modulus (Z): 1384 MPa\u003c\/li\u003e\n    \u003cli\u003eNotched impact strength (XY): 20.11 kJ\/m²\u003c\/li\u003e\n    \u003cli\u003eNotched impact strength (Z): 2.28 kJ\/m²\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"block\"\u003e\n  \u003cstrong\u003ePhysical Properties\u003c\/strong\u003e\n  \u003cul\u003e\n    \u003cli\u003eDensity: 1.06 g\/cm³\u003c\/li\u003e\n    \u003cli\u003eGlass transition temperature: 16 (220°C \/ 10kg)\u003c\/li\u003e\n    \u003cli\u003eHeat deflection temperature: 96.4°C (0.45MPa)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\n\u003cdiv class=\"block\"\u003e\n  \u003cstrong\u003ePrinting Parameters\u003c\/strong\u003e\n  \u003cul\u003e\n    \u003cli\u003ePrinting temperature: 250–280°C\u003c\/li\u003e\n    \u003cli\u003eBed temperature: 90–110°C\u003c\/li\u003e\n    \u003cli\u003ePrinting speed: \u0026lt; 250 mm\/s\u003c\/li\u003e\n    \u003cli\u003eFan cooling: 0–30%\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\n\n\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"eSun","offers":[{"title":"Black","offer_id":47811717890262,"sku":"ASA+175B1Y1","price":31.99,"currency_code":"CAD","in_stock":false},{"title":"Cold White","offer_id":49177724616918,"sku":"ASA+175C-W1Y1","price":31.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2104\/4351\/files\/ASABlack.png?v=1770158458"}],"url":"https:\/\/shop3d.ca\/collections\/professional-materials.oembed","provider":"Shop3D.ca","version":"1.0","type":"link"}