2.85mm

BASF | Ultrafuse® InnoFlex TPC 45D - Flexible Filament - 2.85mm - 500gr.

Product SKU: FL45-2005b050

Sold Out $45.00

Available Stock:
Loading...

This product has been discontinued. Contact us if you would like assistance choosing an alternative.

Previously Innofil3D Filament, new name, same product.

BASF | Ultrafuse TPC 45D Flexible 2.85mm Filament by BASF Ultrafuse®

This is a flexible filament that has great layer adhesion and is much more flexible and softer than the Standard Ultimaker Flexible PLA. It also allows you to use retraction which helps in your printing by reducing stringing and other unintended artifacts.

Technical Specs

Diameter 2.85mm
Weight 500gr

Recommended Print Settings

Print Directly on glass bed at 60°C
225° degree nozzle temperature with brim
Slow it down to ~21mm/s print speed
Reduce retraction length to 2mm
Retraction speed to 15mm/s

Overview

BASF Ultrafuse: flexible, rubberlike elastomer material with different levels of stiffness. A material with a reduced carbon footprint and improved elastic performance.

Shore hardness 45D (slightly harder than 40D), made from Arnitel®Eco. Arnitel®Eco is a partly bio-based Thermoplastic Copolyester Elastomer (TPC ) plastic, which is derived from rapeseed oil and combines the best properties of elastomers (rubbers) and polyesters.

This material is proven to have a carbon footprint up to 50% lower than comparable co-polyesters.

The material delivers excellent adhesion in the Z-direction, meaning that the printed layers don’t detach – even with extreme deformation.

Especially suitable for printing flexible parts like miniature tires, drive belts, bracelets and parts that have to be extremely flexible and have to be bent often.

BASF 3D Printing Solutions is a high quality filament manufacturer also based in Netherlands. This specialty filament comes in 500 gr. spools with 2.85mm diameter. Works wonderfully on the Ultimaker series of printers.