eSun PLA+ 1.75mm in 1kg Clear Spool
eSun's is employing a new PLA+ formula improved from their standard PLA line. This affordable filament has good consistency, rigidity and great surface finish with higher toughness characteristics than standard PLA. It will work natively with your 3D Printer's stock PLA settings. No additional customization is needed. We found this material to be better than our previous generic filament in both consistency between batches and it's bright vibrant colours previously limited for our generic brand.
eSun PLA Plus comes in 1kg spools so you have more material per spool vs. OEM 750gr spools but due to it's size, a larger spool holder is recommended.
Download and print this spool holder to help: Spool Holder (.stl)
PLA is the most common and popular 3D printing material. It has a low melting point which means longer life of your printer components, minimal warping, retains good detail in corners and is very easy to use. If you don't have any special mechanical or chemical requirements, PLA is your go-to choice of material and is compatible with most dual extrusion options.
Our mission at Shop3D is to curate the best selection of filaments in each price class so you don't need to be overwhelmed with options. Quality testing, and printer compatibility are our primary concerns and we're confident this is the best filament at the price range.
- high rigidity
- suitable for printing larger models due to low warp properties
- more impact resistant than standard PLA
- consistent layers and clean retractions produce a superb surface finish
-Compatible with dual extrusion
-Good adherence to clean glass bed (no additives necessary)
PLA + Printing Parameters:
Best print temperature: 205-225 °C
Base temperature: 0/60 °C
Print speed: 30-90mm / s
Travel speed: 90-150mm/s
Shop3D.ca product review notes:
We have tested it thoroughly in our Ultimaker 2's and 2+'s. It works with your standard PLA presets. (210 C nozzle, 60 C bed temperature) The print quality is about 90% - 95% as good as OEM filament, so it is appropriate choice for most purposes. It is a low cost alternative to the OEM and premium filaments without sacrificing dimensional print quality.
Our testing has shown that it premium filaments are recommended for use with the Ultimaker 3 Printers, we recommend using OEM or Innofil3D's PLA for best results and reliability.