This is an economy filament we've tested thoroughly and found it is of good quality and consistency. It will work with any North American Standard 1.75mm diameter printer with the stock PLA settings. No additional customization is needed. They are 1kg spools.
PLA is the most common and popular 3D printing material. It has a low melting point which means longer life of your printer components, almost no warping, retains good detail and corners and is very easy to use. When in doubt, just starting out, or don't have any special requirements, PLA is your go-to choice of material.
Of course the durability of your printer is paramount so this is why it has taken us so long to test a whole array of suppliers to find one that will produce a quality filament for an economical price.
We have tested the 2.85mm variant thoroughly in our Ultimaker 2's and 2+'s. It works with your standard PLA presets. (210 C nozzle, 60 C bed temperature) The print quality is about 90% - 95% as good as OEM filament, so it is appropriate choice for most purposes. It is a low cost alternative to the OEM and premium filaments without sacrificing dimensional print quality.
Our testing has shown that it is not as suitable for use on the Ultimaker 3 Series of Printers. Bed adhesion is more difficult, the spool size of the Ultimaker 3 is smaller so the fit is tight and finally Generic PLA has shown to be difficult to pair with PVA for soluble support. For Ultimaker 3 Printers, we recommend using OEM or Innofil3D's PLA.
Visually the material is a little bit translucent so the layers appear to blend into each other a bit more, and it is slightly less shiney then OEM PLA. It also tends to string a little more than OEM filament on complicated prints.
Even though it's 'generic' filament. We have tested it, and ensure that the print quality is within our standards and it produces good results.
We recommend this for drafts, tests, prototypes, general use, large models and models you intend to paint (i.e cosplay).
Print temperature 210 C
Bed Temperature 60 C
Clean glass, no glue
30mm/s - 60mm/s speed.
Ultimaker Materials We’ve developed filaments with superior formulation for incredible print quality. And to optimize every print, there are Cura material profiles that can take care of everything or give...
Innofil 3D is a high quality filament manufacturer also based in Netherlands. 750 gr. spools with 2.85mm diameter. Works wonderfully on the Ultimaker series of printers. PLA is a...
Introducing Innofil3D's Professional line of filaments. The first filament in the series is a truly innovative formula that is made with the demands of professional engineers in mind. A single...
eSun PLA+ in 1kg Spools This affordable filament has good consistency, rigidity and great surface finish with higher toughness characteristics than standard PLA Print Settings PLA + Printing Parameters: Best...