Mississauga: 905-501-8558 EN / δΈζ | Vancouver: 604-336-9393 EN / δΈζ
The UltiMaker S7 can be trusted to do its job, giving you the freedom to do yours. The inductive sensor-enabled bed leveling of the S7 ensures a perfect first layer and the integrated air manager maintains the build volume at an optimally regulated temperature. Additionally, run-out and fan bracket sensors will pause your print and notify you if you run out of filament or if there is a clog that causes your print head to flood
Ultimate connectivity
The UltiMaker S7 is your gateway to the entire UltiMaker platform. Access all the tools you need to start 3D printing β Manage and monitor your prints securely with the UltiMaker Digital Factory, improve your 3D printing knowledge with e-learning courses on the UltiMaker Academy, and choose from hundreds of materials and plugins using the UltiMaker Marketplace.
Improved air quality, safer workplace
The UltiMaker S7 Air Manager guarantees a more secure workplace by creating an enclosed airflow system that filters out 95% of ultrafine particles (UFPs*) released during 3D printing. It also creates a safe physical barrier around the print area, ensuring peace of mind and enhancing air quality. Additionally, it improves print quality by providing a fully enclosed build chamber and a single glass door.
More materials, less hassle
With optimized software profiles, the UltiMaker S7 Air Manager enables precise filtering control for each UltiMaker material and over 40 third-party filaments. This means you can focus on creating the perfect 3D printed part using any material you prefer, without having to worry about ultrafine particles (UFPs) or spending extra time configuring your printer.
*Tested by Fraunhofer WKI. Only including UltiMaker materials.
Flexible build plate
The flexible steel build plate allows easy, toolless removal of 3D printed parts, making it possible to reset the UltiMaker S7 in a fraction of the time it normally takes. 25 magnets and 4 pins securely hold the plate in perfect alignment, allowing for one-handed operation. A sensor prevents a print from starting without the build plate present. And the flex plate's PEI coating reduces the need for glue or build plate adhesion structures for some materials.
New inductive printhead
The success or failure of 3D prints hinges on their initial layer. The UltiMaker S7 has introduced a new inductive sensor that is capable of detecting even the slightest irregularities on the build plate's surface with greater precision and reduced interference. The machine is factory-calibrated for bed tilt, eliminating the need for manual adjustments and the possibility of mistakes by users. These advancements enable users to initiate a print job and leave it unattended with increased confidence in achieving a flawless first layer. Faster, touchless probing will be available in Spring 2023.
Transform the UltiMaker S7 into a manufacturing powerhouse. With 3x the material capacity. Automated filament handling. Humidity-controlled storage. with the Ultimaker Material Station all while featuring the new technology of the standard UltiMaker S7
Always-fresh 3D printing materials The Material Station on the UltiMaker S7 Pro Bundle stores material in an environment below 40% relative humidity. This keeps the filaments pristine and leads to higher print success. It's like the spool never left its packaging.
Designed for ultra-low maintenance and tested to be left unattended, the Material Station allows the UltiMaker S7 to print longer β day or night. Loading material into the Material Station takes seconds β not minutes. Simply open the door and drop the spool into a bay. During a print, any spool not in use can be switched out.
Each of the Material Station's material bays have NFC readers and reinforced prefeeders for integration with UltiMaker Cura and Digital Factory. Every spool is kept at 40% relative humidity, making it easy to realize more 3D printing applications with almost any combination of polymers and abrasive composites.
| Technology: | Fused filament fabrication (FFF) |
| Type: | Dual Extrusion |
| Build Volume: | 330 x 240 x 300 mm |
| Assembled Dimensions With Material Station: | 495 x 585 x 1180 mm |
| Layer Resolution: | Down to 20 micron |
| Build Plate: | PEI coated flexible build plate |
| Certifications: | cMETus |
| Filament Diameter: | 2.85 mm |
| Price: | $15,870.00 |
| Technology: | Fused filament fabrication (FFF) |
| Type: | Dual Extrusion |
| Build Volume: | 330 x 240 x 300 mm |
| Assembled Dimensions With Spool Holder: | 495 x 585 x 780 mm |
| Layer Resolution: | Down to 20 micron |
| Build Plate: | PEI coated fl exible build plate |
| Certifications: | cMETus |
| Filament Diameter: | 2.85 mm |
| Price: | $11,450.00 |