Bambu Lab - PETG HF (1.75mm) 1kg

Product SKU: G02-K0-1.75-1000-SPL

Sold Out $29.99

Available Stock:
Loading...

Benefits of Buying Bambu Lab from Shop3D.ca

Certified & Approved Products

ESA-approved and TÜV-certified printers for the Canadian market
Approved vendor for government, education, and diversity-certified supplier

Comprehensive Training & Support

Free onboarding training for educational institutions
Account managers providing recommendations and best practices

Warranty & Repair Services

Bambu Lab warranty with local troubleshooting and parts
Local repair facility and warranty facilitation

Convenient & Responsive Local Support

Immediate response via phone or chat
Local pickup available in Vancouver and Mississauga

Bambu Lab PETG HF

PETG HF is a fully optimized PETG filament designed specifically for high-speed printing. With a default printing speed that is twice as fast as standard PETG filaments, PETG HF takes your printing efficiency to new heights.

It effectively addresses common issues such as oozing and clumping associated with regular PETG, ensuring smoother and more reliable prints. The new matte finish not only enhances the aesthetic by smoothing out uneven gloss during speed transitions but also provides a consistently uniform look.

Offering greater durability and toughness than PLA, PETG HF is the ideal choice for creating long-lasting items with an improved finish and faster production times.

Design for Speed

Twice as fast as standard PETG*, PETG HF significantly boosts your productivity without compromising the quality of your prints.

* The speed of PETG HF can be twice as fast compared to regular PETG, but achieving this speed is highly dependant on model size and geometry.

Print Flawlessly with Minimal Tuning

PETG HF excels in printability among PETG filaments with its higher adaptability for printers and printing settings, achieving ideal print results without fine-tuning parameters. Thanks to advanced formula optimization, PETG HF bids farewell to oozing and clumping, ensuring smoother prints with crisp details.

Smooth, Soft Texture

PETG HF provides a smooth texture and consistent gloss at any printing speed, ensuring uniformity and sharp details in every print.

Ready for Outdoor Use

PETG HF maintains the inherent strengths of regular PETG, providing superior resistance to water, UV, and temperatures. Tougher and more durable than PLA, with higher temperature resistance, it's the perfect choice for printing outdoor items such as planter pots, bird cages, watering cans, and automotive parts. Additionally, it's ideal for outdoor toys that require long-term exposure and the ability to withstand impacts, collisions, and falls.

Accessory Compatibility

	Recommended	Not Recommended
Build Plate	Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate	/
Hotend	All Size/ Material	/
Glue	Bambu Liquid Glue Glue Stick	/

Parameters Comparison

	PLA Basic	PETG HF	PETG Basic
Printing Speed*	~ 300 mm/s	~ 300 mm/s	~ 200 mm/s
Preset Printing Speed*	258 mm/s	258 mm/s	172 mm/s
Strength (Bending Strength - XY)	76 MPa	64 MPa	65 MPa
Stiffness (Bending Modulus - XY)	2750 MPa	2050 MPa	1670 MPa
Layer Strength (Bending Strength - Z)	59 MPa	48 MPa	48 MPa
Layer Adhesion (Impact Strength - Z)	13.8 kJ/m²	10.6 kJ/m²	13.6 kJ/m²
Toughness (Impact Strength - XY)	26.6 kJ/m²	31.5 kJ/m²	52.7 kJ/m²
Heat Resistance (HDT, 0.45 MPa)	57 °C	69 °C	69 °C

1. Maximum Printing Speed* refers to the highest speed achievable by the filament while maintaining high print quality, given an appropriate increase in nozzle temperature. 2. Preset Maximum Printing Speed* refers to the highest speed achievable with default settings, ensuring top printing quality in most environments. Settings: Bambu Lab X1-Carbon, 0.4 mm nozzle, 0.2 mm layer height

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

gif showing filament loading and detection

Recommended Printing Settings

Drying Settings (Blast Drying Oven): 60 °C，8 h
Printing and Keeping Container's Humidity: < 20% RH (Sealed， with Desiccant)
Nozzle Temperature: 230 - 260 °C
Bed Temperature (with Glue): 65 - 75 °C
Printing Speed: < 300 mm/s

Physical Properties

Density: 1.28 g/cm³
Vicat Softening Temperature: 70 °C
Heat Deflection Temperature: 69 °C
Melting Temperature: 214 °C
Melt Index: 28.2 ± 2.7 g/10 min

Mechanical Properties

Tensile Strength: 34 ± 4 MPa
Breaking Elongation Rate :> 8.6 ± 1.2 %
Bending Modulus: 2050 ± 120 MPa
Bending Strength: 64 ± 3 MPa
Impact Strength: 31.5 ± 2.2 kJ/m²

Accessory Compatibility

Dry out before use for higher printing quality. PETG HF must be dried before use and remain moisture-free during the printing process, especially for longer print times (over 6 hours).

Drying conditions: 65℃ for 8 h in the Blast Drying Oven; 75 - 85℃ for 12 h in the X1 Series Heatbed. For more details please refer to: Filament Drying Recommendations on WIKI. Please note that the spool can withstand the higher temperature for drying on the heated.

What's in the Box?

Filament with Spool1 & Desiccant1

* Please note: The refill version contains only the filament refill and does not include a spool.

Package*1

Downloads

Material Safety Data Sheet

Technical Data Sheet