1.75mm Filament
Our full line of 1.75mm filament works with other printers out there such as PRUSA, Raise3D, Craftbot, Dremel, Monoprice, Makerbot, Flashforge, etc. (We recommend using only Zortrax Filaments with Zortrax printers even though they are 1.75mm).
Forward AM | Ultrafuse® PLA Filament
$33.00
Forward AM Material is proudly produced in Europe Forward AM | Ultrafuse® PLA Filament for 1.75mm & 2.85mm 3D Printers PLA (Polylactic Acid) – the most used 3D printing material...
Dremel 3D 1.75mm PLA Filament
$44.00
Dremel Digilab has changed distributors. At this time, stock may be fulfilled from a non Shop3D warehouse. Made for Dremel Printers Dremel PLA filament has been specifically engineered for optimal printing...
Raise3D Premium PLA Filament - 1.75mm (1kg)
$42.99
Raise3D Premium Filament - PLA 1.75mm (1kg Spool) PLA or Polylactic acid is a bio-degradable industrial thermoplastic, which is easy to print, durable and relatively strong. It is also non-toxic and...
Forward AM | Ultrafuse® Professional Series PRO1 High Speed PLA Filament
$49.00
Forward AM Material is proudly produced in Europe Forward AM | Ultrafuse® PRO1 1.75 & 2.85mm Filament Forward AM Ultrafuse PLA PRO1 is a special PLA (Polylactic Acid) compound with...
eSun eSilk 3D Printing PLA - 1.75mm 1kg
$32.50
eSilk PLA filament is more sensitive to moisture than regular PLA filament. Keep the spools in a bag with dessicant and if you notice decreased reliability on your machine, try...
Forward AM | Ultrafuse® PLA Filament 2.5kg Big Reel
$99.00
Forward AM Material is proudly produced in Europe We recommend using a Large Spool Holder to dispense this Big Reel. Forward AM | Ultrafuse® PLA Filament - Big Reel These are 2.5kg...
eSun Standard PLA - 1kg Spool
$24.00
Due to the Covid-19 outbreak, our regular stock supply has been disrupted and possibly out of stock for a longer than expected period. We are still receiving regular shipments from...
ePLA-Matte - 1kg Spool 1.75mm
$26.00
A Cost-Effective PLA Material that is Environmentally Friendly and Easy to Print Compared with ABS, ePLA-Matte has higher rigidity and PC-like strength and does not require a closed cavity. With...
eSun eClean - Cleaning Filament - 0.1kg
$12.00 $16.95
Do not use this filament for printing. Recommended only for cleaning. Cleaning Filament from eSun Clean & unclog your print core. eClean MSDS Ultimaker - Atomic Pull After a...
eSun 3D Printing ABS+ 1kg
$24.00
3D Printing with ABS+ does release harmful odours. ABS+ should not be used in a classroom environment without an enclosure and filtration. ABS+ printing should be conducted in a well-ventilated...
Raise3D Premium ABS Filament - 1.75mm (1kg)
$42.99 $45.99
Raise3D Premium Filament - ABS 1.75mm (1kg Spool) ABS or Acrylonitrile Butadiene Styrene is one of the most widely used industrial thermoplastics, which has great mechanical properties and good heat...
Forward AM | Ultrafuse® PRO1 Filament 2.5kg Big Reel (Netherlands)
$169.00
Forward AM Material is proudly produced in Europe We recommend using a Large Spool Holder to dispense this Big Reel. Forward AM | Ultrafuse® PRO1 Filament - Big Reel Forward AM Ultrafuse...
Raise3D Premium PETG Filament - 1.75mm (1kg)
$42.99 $45.99
Raise3D Premium Filament - PETG 1.75mm (1kg Spool) PETG is the most commonly used form of PET (Polyethylene Terephthalate), with the G version being a glycol-modified PET, which is a...
Raise3D Hyper Speed PLA Filament - 1.75mm (1kg)
$52.00
Raise3D Hyper Speed PLA Filament Hyper Speed PLA filament is one of the specially developed filaments from the High-speed filament line for FFF printing. When printing at high speeds, the...
Forward AM | Ultrafuse® PAHT CF15 - 750g
$119.00 $120.00
Forward AM Material is proudly produced in Europe This filament might not be compatible with the Ultimaker Material Station. This is an abrasive filament that will wear down brass nozzles....
eSun eSilk Magic 3D Printing ePLA - 1.75mm 1kg
$32.50
eSun eSilk Magic PLA in 1kg Spools - 1.75mm When the model printed with dual color pla filament is rotated, it has a dynamic appearance brought by two different colors....
Forward AM | Ultrafuse® ABS Fusion+ Filament - 750gr.
$45.00 $69.00
Forward AM Material is proudly produced in Europe Forward AM | Ultrafuse® ABS Fusion+ Filament Forward AM Ultrafuse ABS Fusion⁺ made with Polyscope XILOY™ 3D is an engineering filament which has...
eSun ePA-CF - Carbon Fiber Nylon - 1kg
$59.00 $65.00
This is an abrasive filament that will wear down brass nozzles. We recommend upgrading to a steel or ruby nozzle. This filament might not be compatible with the Ultimaker Material...
Forward AM | Ultrafuse® PET CF15 (Carbon Fiber) Filament
$89.00
Forward AMMaterial is proudly produced in Europe This filament might not be compatible with the Ultimaker Material Station. This is an abrasive filament that will wear down brass nozzles. We...
Raise3D Premium PC Filament - 1.75mm (1kg)
$71.99
Raise3D Premium Filament - Polycarbonate 1.75mm (1kg Spool) PC or Polycarbonate is one of the advanced industrial thermoplastics, which is extremely tough, durable and with great firmness. PC is known...
Raise3D Premium TPU-95A Filament - 1.75mm (1kg)
$115.00
Raise3D Premium TPU-95A Filament - 1.75mm (1kg) Raise3D Premium TPU-95A (thermoplastic polyurethane) is a flexible and elastic 3D printing filament. Its rubber-like elasticity, resilience, and durability make it suitable for...
Dremel 3D 1.75mm Eco-ABS Filament
$59.99
Engineered for Optimal Printing with your Dremel Digilab 3D45 Dremel Eco-ABS filament has been specifically engineered for optimal printing with your Digilab 3D45. Eco-ABS is a thermal plastic that softens...
Matter3D Performance PETG - Carbon Fiber (15%) - (1kg)
$69.99
Matter3D Performance PLA Carbon Fiber (15%) - 1kg Matter3D Carbon Fiber PETg is made right here in Canada using premium PETg and High-Modulus Carbon Fiber. This filament is ideal for...
Forward AM | Ultrafuse® PP (Polypropylene) - 700gr
$86.00
Forward AM Material is proudly produced in Europe Overview PP is one of the most used materials in the world due to its versatility and ability to engineer lightweight tough...
AquaSys® 120 | Water-Soluble Support Filament (500g)
$140.00
AquaSys® 120 | Water-Soluble Support Filament (500g) High-performance, water-soluble support filament–500g spool. Stable at chamber temperatures up to 120ºC. Technical Specs Material Safety Data Sheet | Technical Data Sheet Weight: 500g....
Forward AM | Ultrafuse® Taste the Rainbow Sampler Pack (6 Spools)
$185.00 $198.00
Forward AM Material is proudly produced in Europe No Colour Substitutions For This Bundle Forward AM | Ultrafuse® Filament Pack - Six Spools (1.75mm / 2.85mm) It might be cold or...
Matter3D Performance PLA - (1kg)
$29.99 $34.99
Matter 3d Performance PLAs are shipped with cardboard spools instead of the plastic spools pictured Matter3D Performance PLA Matter3D’s Performance PLA is FDA approved for food and beverage use, and...
Forward AM | Ultrafuse® rPET Filament (Recycled)
$39.00
Forward AMMaterial is proudly produced in Europe Forward AM| Ultrafuse® rPet PET (Polyethylene terephthalate) is the well-known PET bottle material. This recycled material is a food-approved grade and has a...
eSun ePA Nylon Filament - 1kg - Natural
$36.00 $39.99
ePA Nylon is sensitive to moisture. Always keep it dry before and during printing. Drying solutions available here. eSun ePA Nylon Filament A low-cost nylon filament that also works as...
Forward AM | Ultrafuse® ASA Filament - 750gr. (Netherlands)
$49.50 $59.00
Forward AM Material is proudly produced in Europe These are industrial-grade materials that require experienced 3D printing knowledge. Please consult the technical data sheet. It is recommended to print with an enclosure....
eSun ePLA-LW Filament 1.75mm - 1kg Spool
$49.95
eSun ePLA-LW in 1kg Spools - 1.75mm ePLA-LW (Lightweight PLA) is a material specifically developed by eSUN for use with Model airplanes, drones, and Cosplay. Compared to the eSun Wood PLA, ePLA-LW has a more...
Raise3D Hyper Speed ABS Filament - 1.75mm (1kg)
$52.00
Raise3D Hyper Speed ABS Filament Hyper Speed ABS Filament is one of the specially developed filaments from the High-speed filament line for FFF printing. When printing at high speeds, the...
Raise3D Premium ASA Filament - 1.75mm (1kg)
$57.50
Raise3D Premium Filament - ASA 1.75mm ASA, which stands for acrylic styrene-acrylonitrile, is an amorphous, opaque thermoplastic that is structurally similar to ABS. In many cases, they are quite interchangeable...
Forward AM | ULTRAFUSE® TPU 64D Filament - 750g
$75.00
Forward AM | ULTRAFUSE® TPU 64D Filament Ultrafuse® TPU 64D combines the best of two worlds by being a strong yet flexible filament for Fused Filament Fabrication, suitable for all...
Matter3D Performance PLA - Wood Fill - (1kg)
Sold Out
Matter3D Performance PLA - Wood Fill Matter3D’s Wood Fill Performance PLA is formulated using genuine Vancouver Island wood fibers (10%) and the same great NatureWorks 3D850 resin as our other...
Dremel 3D 1.75mm Nylon Filament
$64.99
Engineered for Optimal Printing with your Dremel Digilab 3D45 Nylon is a synthetic polymer that softens and melts when it’s heated, building your designs strand by strand and layer by...
eSun Wood Filament 1.75mm - 0.5kg Spool
$22.00
eSun Wood Filament in 1.75mm (0.5kg) eSun Wood is a PLA based 3D printing material that can also be biodegradable. The new and cool appearance makes it unique compared to a...
Dremel 3D 1.75mm PET-G Filament
$55.00
Strength and Flexibility A thermoplastic filament that combines the strength of ECO-ABS, some flexibility of Nylon and the easy printability of PLA. It is also very durable and temperature resistant....
Forward AM | Ultrafuse® Stainless Steel 17-4PH - 1kg / 3kg
$485.00
Forward AM Material is proudly produced in Europe Very Important - Special Considerations for 17-4PH: This filament is considered an expert user level filament. Successfully printing, debinding and sintering requires...
Forward AM Ultrafuse® PP GF30 (Polypropylene w/ 30% Glass Fibre) - 700gr
$119.00
Forward AM Material is proudly produced in Europe Overview Ultrafuse PP GF30 is polypropylene, reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing...
Forward AM | Ultrafuse® Natural Nylon (PA) - 750g
$79.00
Forward AM Material is proudly produced in Europe This is an industrial-grade material that requires experienced 3D printing knowledge. Please consult the technical data sheet. It is recommended to print with an...
eSun eMarble Filament 1.75mm - 1kg Spool
Sold Out
eSun eMarble Filament in 1.75mm (1kg) eMarble is a PLA based 3D printing material that can also be biodegradable. The new and cool appearance makes it unique compared to a...
Bambu Lab - PLA-CF (1.75mm) 1kg
$44.99
Bambu PLA-CF Bambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low...
Forward AM | Ultrafuse® Stainless Steel 316L - 3kg
$649.00
Forward AM Material is proudly produced in Europe Very Important - Special Considerations for 316L: This filament is considered an expert user level filament. Successfully printing, debinding and sintering requires...
Matter3D Performance PLA - Carbon Fiber - (1kg)
$48.00 $54.99
Matter3D Performance PLA Carbon Fiber - 1kg Matter3D Performance PLA - Carbon Fiber is made in Victoria, BC using premium NatureWorks 3D850 PLA resin and High-Modulus Carbon Fiber. Carbon Fiber...
Forward AM | ULTRAFUSE® TPU 95A Filament - 750g
$80.00
Ultrafuse® TPU 95A Flexible Filament based on Forward AM Elastollan® Ultrafuse® TPU 95A has been developed specificially to enable fast and easy printing with a flexible filament for Fused Filament...
ePC Filament (eSun) - 0.5kg
$37.00 $45.00
eSun ePC Filament This is a specialty filament which we brought in due to popular demand. Polycarbonate is one of the toughest materials available that can be printed below 300...
Raise3D Industrial PA12 CF Support Filament
$215.99
Raise3D Industrial PA12 CF Support Filament Overview Raise3D Industrial PA12CF Support Filament is a break-away support material specially developed for carbon fiber reinforced composite materials. It creates a stable support...
