$204.00 $216.00
Form 3 Resin Tank Low Force Stereolithography (LFS)™ 3D printing uses linear illumination and a flexible film tank to turn liquid resin into flawless parts. A key component of the...
$136.00
Form 2 LT Resin Tank The Resin Tank LT is suited for long term use and rigorous, high volume printing with approximately 10x longer lifetime, more accurate printer detection,...
$159.00
UltiMaker 3 + S3/S5/S7 print core for build material Professional 3D printing just got more accessible. Maximize the print performance and machine uptime with our swappable, material-matching print cores. Make the...
$81.00
Form 2 Resin Tank The Resin Tank blocks light and is made from shatter-resistant polycarbonate. It comes with a reusable lid and wiper, making it easy to stack tanks and...
$159.00
UltiMaker 3 + S3/S5/S7 print core for support material A 0.4mm Print Core BB is a swappable print core for UltiMaker S3, S5, and S7 with a custom nozzle geometry...
$24.95
Comes in a pack of 10 Sticks Cleaning Filament for the UltiMaker Print Cores Ensure your UltiMaker print cores are always in optimal condition. Especially effective for cleaning a print...
$25.00
Dimafix Adhesion Aid Dimafix Pen (90ml) is a new product based on Dimafix formula. Which maintains the same adhesion properties of Dimafix spray format in aiding in print adhesion and...
$32.50
* If you find these nozzles wear fast on you with more abrasive materials like PAHTCF15 and BASF 316L, We had longer nozzle life on the tool steel nozzles or...
$23.00
Magigoo Original – The 3D printing adhesive All you need for sure adhesion of 3D prints. Magigoo is an easy to use 3D printing adhesive designed to address 'the first...
$136.00
Optional/Replacement Part This part is optional as one is already included with your Form 2 /3 3D Printer. This acts as a spare or a secondary unit. Spare Form 2...
Sold Out
This part is compatible only with the UltiMaker S5. Print Table Glass for the UltiMaker S5 This is a replacement UltiMaker glass plate (for your heated bed). It gives you...
$12.00 $16.95
Do not use this filament for printing. Recommended only for cleaning. Cleaning Filament from eSun Clean & unclog your print core. eClean MSDS Ultimaker - Atomic Pull After a...
$68.50
This part is compatible with UltiMaker 2, UltiMaker 2+ and UltiMaker 3, 3 Extended, and S3 family of printers. Print Table Glass for UltiMaker 2 / 2+ / 3 /...
$3.00
Silicon Nozzle Cover for the UltiMaker S5 and UltiMaker S3 Replacement silicon cover for your UltiMaker S5 or UltiMaker S3 print head. (1 cover per order)
$41.99
The Bowden TubeThis part is compatible with the complete UltiMaker Original, UltiMaker Original+, UltiMaker 2+, UltiMaker 2+ Connect, UltiMaker 3 Series, and UltiMaker S3. Please note: The Bowden Tube is...
Sold Out
ABS Gloop! is designed to work on glass, AND mirror surfaces. DO NOT use 3D Gloop! on any textured print surface as it will likely permanently fuse to it. 3D Gloop!...
$36.00 $47.50
The 3D Printing Essential Toolkit Get the bundle of accessories that we reach for on a daily basis. Tools to maintain your printer, clean up your prints and generally useful...
$59.99
Replacement / Spare Adhesion Surface to be applied to a Pro2 Build Platform. Dimensions: 13.3 x 13.3 (inches). Fit for the Pro2 Series of printers only.
$3.00
Silicon Nozzle Cover for the UltiMaker 3 Replacement silicon cover for your UltiMaker 3 and UltiMaker 3 Extended PrintHead.
$68.00
Raise3D Tool Steel Nozzle with WS2 Coating Raise3D Tool Steel nozzles for the Pro2, E2 and Pro3 printer series. Coated in WS2 for abrasive material printing. Various sizes at 0.4mm /...
$891.00
Automate Cleaning with Form Wash While you’re away, parts are precisely agitated in IPA, getting every nook and cranny perfectly clean. Once washing completes, Form Wash automatically lifts parts out of the IPA, avoiding...
$409.00
Resin Tank for the Formlabs Form 3L SLA 3D Printer Low Force Stereolithography (LFS) 3D printing uses linear illumination and a flexible film tank to turn liquid resin into flawless parts....
$1,028.00
Reliable, Professional Post-Curing Form Cure is finely tuned to bring parts to their maximum mechanical properties. Once the time is up, parts are fully cured and ready for peak performance. Technical Specs...
$70.00
* Recommended to change after 1500 hours * Replacement Air Manager for UltiMaker S5, S7 & 2+ Connect Air Managers. (1 filter)
$114.99
Replacement / Spare Hot End Assembly. This part can also be used to house different size nozzles, as changing hot end assemblies is often faster than nozzle swaps on the Pro2...
$99.95
Recommended: 4-8 pumps. Too many pumps may cause buckling. Release the vacuum and reapply at least once a month to prevent container base from buckling. Printdry Vacuum Sealed Filament Container...
$14.00
These are premium extremely high quality replacement Nozzles for the Olsson Block or the Ultimaker 2+ series of 3D printers. Extra High quality replacement nozzles for when your original nozzles get too dirty...
$28.75 $30.25
Due to this item being an aerosol, it can only be shipped via Fedex Ground with special handling. Other combined items will also be limited to Fedex ground. Free shipping...
$6.50
A Tool for Support Removal Flush cutters are useful tools in 3D printing especially in print cleanup to cleanly snip away excess 3D printed material or supports to maintain a nice...
$163.00
16 Colors, a Full Spectrum of Possibilities The first integrated color mixing solution for stereolithography, the Formlabs Color Kit enables 3D printing in 16 colors without the manual work of...
$105.00
As of February 2022, we no longer ship this over the border to the United States of America. Contact us for more details. TPM Wash Solvent for Formlabs (1 Gallon)...
$314.00
Formlabs Build Platform 2 Build Platform 2 with patented Quick Release Technology allows you to quickly and easily release parts from the build platform without tools in seconds. Build Platform...
$70.99
Heater Cartridge for UltiMaker 2+ / 2+ Extended Family This is the replacement UltiMaker 2 heater cartridge 24V 35W. It heats up the printhead for the UltiMaker 2 or 2+...
$26.00 $29.99
Brass Nozzle for Raise3D Pro2, Pro3 & E2 Series 3D Printers Raise3D brass nozzle in 0.4mm for the Pro2 Series, Pro3 Series and E2 3D printers. Installing Hot-Ends Pro2 Series Hot-end installation instructions can...
$720.00
Reduce Downtime, Stay Productive The UltiMaker Enhanced Service Plan extends and enhances the standard warranty coverage on UltiMaker hardware so you can avoid unbudgeted repair costs and still get the...
$123.00
5 Piece Same-Size Nozzle Packs 0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm (Choose one) Ensure a seamless printing experience with a handy set of fivenozzles for the UltiMaker 2+...
$73.99
PT100 B Sensor for the UltiMaker 2 This is the PT100 B Sensor. Only compatible with the UltiMaker 2 family. This is the UltiMaker 2 Family PT100 B Sensor. It...
$6.75
What's Included There are 3 different sized nozzle needles to help you clean various cores - each pack comes with 10 needles. The sizes include: 0.35mm x 50mm suitable for...
$5.50
Remove Prints From Your Printer A set of 5 palette knives or painting knife that is generally used to reach under your 3D prints to peel them off the glass...
$18.00 $25.00
Keep your filament at its best. The 3D printing filament vacuum kit is a novel portable household vacuum device for vacuum storage of filaments, especially for some with high water...
$25.00
This is the UltiMaker 2+ TFM Teflon coupler. Replace this part when your original TFM coupler shows signs of wear and friction in the tube. In our testing, this part...
$4.99
Replacement / Spare Silicon Cover
$57.00 $61.00
Magigoo Original – The 3D printing adhesive – Large Format All you need for sure adhesion of 3D prints. Magigoo is an easy to use 3D printing adhesive designed to address...
$5.00
Clip Clamps for Bowden Tube These little buggers keep going missing. You do an atomic method cleaning and next thing you know, they're gone. Get 2 replacement clips and never let...
$64.99
Replacement / Spare Adhesion Surface to be applied to a Pro3 Build Platform. Dimensions: 13.11 x 13.11 (inches). Fit for the Pro3 Series of printers only.
Sold Out
Adhesion Sheets Pack for UltiMaker 3D Printers The Adhesion sheet is a thin printing aid that helps certain materials (especially engineering filaments) get a good stick to your heated bed....
$9.99
Replacement / Spare Temperature Sensor