Raise3D Parts
Raise3D Pro2 - Printing Surface (Buildtak)
$59.99
Replacement / Spare Adhesion Surface to be applied to a Pro2 Build Platform. Dimensions: 13.3 x 13.3 (inches). Fit for the Pro2 Series of printers only.
Raise3D Tool Steel Nozzle w/ WS2 Coating
$68.00
Raise3D Tool Steel Nozzle with WS2 Coating Raise3D Tool Steel nozzles for the Pro2, E2 and Pro3 printer series. Coated in WS2 for abrasive material printing. Various sizes at 0.4mm /...
Raise3D - Hot End Assembly (Pro2 Series)
$114.99
Replacement / Spare Hot End Assembly. This part can also be used to house different size nozzles, as changing hot end assemblies is often faster than nozzle swaps on the Pro2...
Raise3D V3 Brass Nozzle 0.4mm
$26.00 $29.99
Brass Nozzle for Raise3D Pro2, Pro3 & E2 Series 3D Printers Raise3D brass nozzle in 0.4mm for the Pro2 Series, Pro3 Series and E2 3D printers. Installing Hot-Ends Pro2 Series Hot-end installation instructions can...
Raise3D Pro3 - Printing Surface (Buildtak)
$64.99
Replacement / Spare Adhesion Surface to be applied to a Pro3 Build Platform. Dimensions: 13.11 x 13.11 (inches). Fit for the Pro3 Series of printers only.
Raise3D E2 & E2CF - Printing Surface Only (Buildtak)
$69.99
Replacement / Spare Printing Surface for the E2 & E2CF (Buildtak) * E2 Flexible Build Plate not included *
Raise3D - Pro2 Hotend Silicon Cover (3 pack)
Sold Out
Replacement / Spare Silicon Cover
Raise3D Interchangeable Hot End (w/standard nozzle)
$155.99
Raise3D Interchangeable Hot End A new Interchangeable Hot End for Raise3D Pro3 Series of 3D printers. Comes with full hotend with 0.4mm Brass Nozzle pre-installed.
Raise3D - Thermocoupler V2 (Pro2 Series)
$9.99
Replacement / Spare Temperature Sensor
Raise3D - Extruder Front Cooling Fan (Pro2 Series)
$14.99
Replacement / Spare Heat Sink Fan
Raise3D E2 - Left Hot End Assembly
$112.99
Left-hand Extruder Replacement / Spare Hot End Assembly for the Raise3D E2. This part can also be used to house different size nozzles, as changing hot end assemblies is often faster...
Raise3D - Extruder Side Cooling Fan (Pro2 Series)
Sold Out
Replacement / Spare Part Cooling Fan
Raise3D E2 - Flexible Build Plate + Printing Surface
$112.00
Replacement / Spare Flexible Build Plate and Printing Surface for the E2
Raise3D Pro3 Build Plate with Buildtak Printing Surface
$116.99
Raise3D Pro3 Build Plate with Protector A new build plate for Raise3D Pro3 series 3D printers. Comes with a sheet of Pro3 Buildtak Printing Surface.
Raise3D - Pro2 / N2 Glass Build Plate
Sold Out
Replacement build glass plate for the Pro2 / Pro2 Plus / N2 / N2 Plus printer. Size 330mm x 340mm x 1/8"
Raise3D E2 - Right Hot End Assembly
$112.99
Right-hand Extruder Replacement / Spare Hot End Assembly for the Raise3D E2. This part can also be used to house different size nozzles, as changing hot end assemblies is often faster...
Teflon Throat Tube - 2 in a pack (Pro3 Series Only)
$28.99
Replacement/Spare Teflon tube for the Pro3/Pro3+ (2 in a pack) This is a replacement part that fits the printhead on the Pro3/Pro3+ series machine, it is the same for the...
Raise3D - Hyper Speed Hot End 0.4mm (Pro3 Series Only)
$195.00
Raise3D - Hyper Speed Hot End 0.4mm (Pro3 Series Only) High-flowrate hot ends designed for the Pro3 Series on Hyper Speed Mode. Important Information Please note that for Hyper Speed...
Raise3D E2 - Replacement Air Filter
$59.99
Replacement Filter for Raise3D E2 Printer. Recommended: To be replaced every 3-6 months.
Raise3D - Pro2 Build Plate (without printing surface)
$156.99
Replacement / Spare build plate with no adhesion sheet. This part can be used to put a different kind of adhesion surface instead of the BuildTak like a PEI, or...
Raise3D Side Cooling Fan Cover - Pro3 Series
$12.99
Raise3D Side Cooling Fan Cover - Pro3 Series Side Cooling Fan Covers for Raise3D Pro3 Series only.
Raise3D Pro3 Series Model Cooling Fan Replacement
$20.79
Replacement Model Cooling Fan for Raise3D Pro3 Series 3D printers.
Raise3D E2 & E2CF Auto-Leveling System Assembly
Sold Out
Replacement Auto-Leveling System Assembly for Raise3D E2 & E2CF 3D printers.
Raise3D - Pro2 Fan & Air Filter Assembly
$70.99
Fan & Air Filter Assembly for the Raise3D Pro2 Series
Raise3D E2 - Left Extruder Front Cooling Fan
$14.99
Extruder / Heatsink Front Cooling Fan (Left Side) - Raise3D E2 Series
Raise3D Pro3 Series Guide Tube Replacement
$12.99
Replacement Guide Tube for Raise3D Pro3 Series 3D printers.
Raise3D V2 Brass Nozzle 0.4mm (N Series Only)
$24.99
Brass Nozzle for Raise3D (N Series Printer Only) Raise3D brass nozzle in 0.4mm N Series of Raise3D printers. The V2 Brass Nozzle has excellent thermal conductivity, which means it can transfer heat from the hot end...
Raise3D Hot End Assembly (V2) (N Series Only)
Sold Out
Raise3D Hot End Assembly (V2) (N Series Only) Raise3D N series extruder hot end kit, including a brass nozzle, aluminum heating block, throat pipe (built-in PTFE tube), silicone protective cover....
Raise3D Pro3 Series Filament Run-Out Sensor
$51.99
Raise3D Pro3 Series Filament Run-Out Sensor New Fialment Run-Out Sensors for Raise3D Pro3 Series of printers.
Raise3D E2 - Right Extruder Front Cooling Fan
$14.99
Replacement / Spare Cooling Fan
Raise3D Pro3 - Build Surface Only
$64.99
Raise3D Pro3 Build Surface A new Build Surface for Raise3D Pro3 Series (spring sheet only).
Raise3D E2 Extruder Connection Cable - E2 Series
$20.39
Raise3D E2 Extruder Connection Cable - E2 Series Packaging Size (WxDxH): 130x110x20mm Weight with Packaging: 32g
Raise3D Interchangeable Hot End (w/WS2 Hardened Nozzle)
$185.00
Raise3D Interchangeable Hot End with Upgraded Nozzle A new Interchangeable Hot End for Raise3D Pro3 Series of 3D printers. Comes with full hotend with 0.4mm WS2 Tool Steel Hardened Nozzle...
Raise3D Pro3 Auto-Leveling Assembly
$99.99
Raise3D Pro3 Auto-Leveling Assembly A new Raise3D Auto-Leveling Assembly for the Pro3 Series.
Raise3D E2CF Hot End Assembly Replacement
$259.99
Replacement Hot End Assembly for Raise3D E2CF 3D printers.
Raise3D Pro2 - XY Belt (open)
$14.99
Replacement / Spare X Y Belt for the Raise3D Pro2 Series. Recommended: Replace every year.
Raise3D Left Extruder without Hot End Assembly (Pro3 Series Only)
$271.99
Raise3D Right Extruder without Hot End Assembly (Pro3 Series Only) A replacement left extruder for the Raise3D Pro3 and Pro3+ series of 3D printers.
Raise3D Coupler - Pro2 & Pro3 Series
$13.60
Raise3D Coupler for Pro2 and Pro3 series printers.
CXC - Camera Assisted XY Calibration Tool
$64.99
Print Calibration made simple! Ember’s new Camera-Assisted XY Calibration Tool (CXC) is a small device that easily performs XY offset calibration on dual extruder, IDEX, and tool changing 3D printers,...
Raise3D E2 - Left Model Cooling Fan
$14.99
Replacement / Spare Cooling Fan.
Raise3D Pro3 P Thermocouple
$13.59
Raise3D Pro3 P Thermocouple A replacement P Thermocouple for the Raise3D Pro3 and Pro3+ 3D printers.
Raise3D Pro3 Heating Block
$17.67
Raise3D Pro3 Heating Block A replacement heating block for the Pro3 series of Raise3D printers.
Raise3D Pro2 - Z Belt
Sold Out
Replacement / Spare Z Belt for the Raise3D Pro2 Series. Recommended: Replace every year.
Raise3D Pro3 P Heating Rod
$40.79
Raise3D Pro3 P Heating Rod A replacement P heating rod for the Raise3D Pro3 and Pro3+ series of 3D printers.
Raise3D Pro2 Filament Guiding Tube
$6.90
Raise3D Pro2 Filament Guiding Tube For the Raise3D Pro2 and Pro2+ 3D printers.
