Bambu Lab - PLA Support Material (1.75mm) - White

Product SKU: S02-W0-1.75-500-spl

$44.99

Available Stock:
Loading...

Benefits of Buying Bambu Lab from Shop3D.ca

Certified & Approved Products

ESA-approved and TÜV-certified printers for the Canadian market
Approved vendor for government, education, and diversity-certified supplier

Comprehensive Training & Support

Free onboarding training for educational institutions
Account managers providing recommendations and best practices

Warranty & Repair Services

Bambu Lab warranty with local troubleshooting and parts
Local repair facility and warranty facilitation

Convenient & Responsive Local Support

Immediate response via phone or chat
Local pickup available in Vancouver and Mississauga

Bambu Lab PLA Support

Bambu Lab's PLA support material offers convenient and efficient support for your 3D prints. It's easily removable by hand and provides a perfect support interface, making it suitable for use with all PLA materials. The support material comes with a basic reusable spool and maintains a consistent diameter of 1.75mm (+/- 0.03mm). This material is also compatible with the Bambu Lab AMS.

Support for PLA needs proper drying before printing: recommended drying temperature is 55 ℃ for 8 hours in a blast drying oven. Learn more about filament drying. Please refer to Filament drying cover on WIKI.

Please Note: This material should only be used for support interfaces and should never be used for printing models on its own. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.

Technical Specs

Recommended Printing Settings

Drying Settings (Blast Drying Oven): 55 °C，8 h
Printing and Keeping Container's Humidity: <20% RH (Sealed, with Desiccant)
Nozzle Temperature: 220 - 230 °C
Bed Temperature (with Glue): 35-45 °C
Printing Speed: <200 mm/s

Physical Properties

Density: 1.22 g/cm³
Vicar Softening Temperature: N/A
Heat Deflection Temperature: N/A
Melting Temperature: 190°C
Melt Index: 6.4 ± 1.2 g/10 min

Mechanical Properties

Tensile Strength: N/A
Breaking Elongation Rate: N/A
Bending Modulus: N/A
Bending Strength: N/A
Impact Strength: N/A

Attribute Comparison

PLA Support

Colour: White & Black
Nozzle Temperature: 210-230°C
Bed Temperature: 35-45°C
Print Speed: <200mm/s
Water Soluble: No
Cannot be used with: PA-CF, PA-GF, PET-CF, ABS, PETG, TPU, ASA

PA/PET Support

Colour: Green
Nozzle Temperature: 270-290°C
Bed Temperature: 80-100°C
Print Speed: <100mm/s
Water Soluble: No
Recommended For: PA6-CF,PAHT-CF,PA-CF, PA-GF, PET-CF
Cannot be used with: PLA, ABS, PETG, TPU, ASA

Downloads

What's In The Box

Filament & Desiccant
Box
Filament Label

Highlights

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through the Bambu Lab AMS (Automatic Material System). Load and print! No more tedious setting steps.