Ultimaker 2.85mm

BASF | Ultrafuse® BVOH Filament (Netherlands)

Product SKU: 50677354

$55.00 $60.00

Available Stock:
Loading...

Debating which support filament is superior? Click here to read a comparison.

BASF | Ultrafuse BVOH Filament

BASF Ultrafuse BVOH, an ideal water-soluble support material for your 3D print Printing complex designs may only be possible with temporary support structures. BASF Ultrafuse BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature.

Technical Specs

Material Safety Data Sheet | Technical Data Sheet

Nozzle Temperature = 190 – 210 °C / 374 – 410 °F
Bed Temperature = 60 – 100 °C / 140 – 212 °F
Bed Material = Glass
Nozzle Diameter = ≥ 0.4 mm
Print Speed = 30 – 60 mm/s

General Properties

Drying recommendations to ensure printability = 60 °C in a hot air dryer or vacuum oven for 4 to 16 hours
Density 1138 kg/m3 / 71.0 lb/ft3
Glass Transition Temperature = 69 °C / 156 °F
Crystallization Temperature = 122 °C / 252 °F
Melting Temperature = 175 °C / 347 °F
Melt Volume Rate = 11.4 cm3 /10 min / 0.7 in3 /10 min (210 °C, 2.16 kg)

Product Description

Printing complex designs may only be possible with temporary support structures. BASF Ultrafuse BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials: PLA, PRO1, ABS, ABS Fusion+, PA and PAHT CF15. Store this monofilament in a sealed bag or container to prevent moisture uptake.

Overview

The components of this filament are butenediol vinyl alcohol copolymer based filament for Fused Filament Fabrication.

BASF Ultrafuse BVOH filament should be stored at 15 - 25°C in its originally sealed package in a clean and dry environment. If the recommended storage conditions are observed, the products will have a minimum shelf life of 12 months.

The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

This spool comes in 2.85mm ot 1.75mm diameter filament spools of 350gr

Notice

CA Residents: Prop 65 WARNING(s)