Free Shipping over $200 | Orders ship out at 2pm Monday-Friday

eSun 3D Printing PLA+ - 2.85mm 1kg

Product SKU: PLA+285SK1

Available Stock:
Olive Green
Light Blue
Peak Green
Dark Blue
Due to the Covid-19 outbreak, our regular stock supply has been disrupted and possibly out of stock for a longer than expected period. We are still receiving regular shipments from our suppliers in the Netherlands for BASF | Ultrafuse filament.
eSun PLA+ in 1kg Spools

This affordable filament has good consistency, rigidity and great surface finish with higher toughness characteristics than standard PLA

Print Settings
eSun Material Datasheet
  • PLA + Printing Parameters:
  • Best print temperature: 205-225 °C
  • Base temperature: 0/60 °C
  • Print speed: 30-90mm / s
  • Travel speed: 90-150mm/s 
  • high rigidity
  • suitable for printing larger models due to low warp properties
  • more impact resistant than standard PLA
  • consistent layers and clean retractions produce a superb surface finish.
  • compatible with dual extrusion
  • good adherence to clean glass bed (no additives necessary) Product Review

We have tested it thoroughly in our Ultimaker 2's and 2+'s. It works with your standard PLA presets. (210 C nozzle, 60 C bed temperature) The print quality is about 90% - 95% as good as OEM filament, so it is an appropriate choice for most purposes. It is a low-cost alternative to the OEM and premium filaments without sacrificing dimensional print quality.

Our testing has shown that premium filaments are recommended for use with the Ultimaker 3 Printers, we recommend using OEM or Innofil3D's PLA for best results and reliability.

Luminous Blue is a glow filament and considered abrasive compared to the other filaments.  


eSun's is employing a new PLA+ formula improved from their standard PLA line.  This affordable filament has good consistency, rigidity and great surface finish with higher toughness characteristics than standard PLA.  It will work natively with your Ultimaker with the stock PLA settings.  No additional customization is needed.  We found this material to be better than our previous generic filament in both consistency between batches and it's bright vibrant colours previously limited for our generic brand.

eSun PLA+ comes in 1kg spools so you have more material per spool vs. OEM 750gr spools, but due to it's size, a larger spool holder is recommended for your Ultimaker Printers. 

Download and print this 1kg Spool holder for your Ultimaker 2+:  Spool Holder (.stl)

PLA is the most common and popular 3D printing material. It has a low melting point which means longer life of your printer components, minimal warping, retains good detail in corners and is very easy to use. If you don't have any special mechanical or chemical requirements, PLA is your go-to choice of material and is compatible with most dual extrusion options.

Since Ultimaker uses an open filament system, it is not mandatory to use OEM filament.

Our mission at Shop3D is to curate the best selection of filaments in each price class so you don't need to be overwhelmed with options.  Quality testing, and printer compatibility are our primary concerns and we're confident this is the best filament at the price range.

Our Expert Staff Are Here to Help

We are available to assist you in finding the right fit for your project while answering your technical questions.
  • Toronto
    10am-6pm EST, Monday-Friday
  • Vancouver
    10am-6pm PST, Monday-Friday
Speak with our Applications Engineer to find efficiencies and determine your ROI - Book a Technical Consultation