2.85mm 1.75mm

eSun 3D Printing ABS+ 1kg

Product SKU: ABS+285U1

Sold Out $24.00

Available Stock:
Loading...

Filament Diameter

2.85

1.75

Colour

Quantity

eSun Has discontinued the use of plastic spools, newer batches of eSun Filament will have cardboard spools instead of plastic.

3D Printing with ABS+ does release harmful odours. ABS+ should not be used in a classroom environment without an enclosure and filtration. ABS+ printing should be conducted in a well-ventilated workshop for best safety practices.

Durability, Medium Heat Resistance and Strength

ABS+ is a very familiar material to Engineers and professionals. While it is truly proven material in everyday objects, it should be considered a filament for users at an intermediate or advanced level. This material is suited for users who require durability, medium heat resistance and strength in their prints.

Print Settings

eSun Material Datasheet | eSun ABS Material Safety Data Sheet

Nozzle: 220-260C
Bed: 100-110C
Feed rate: 30-90mm/s
Idling speed: 90-150mm/s

For bed adhesion, try the following:

Dimafix Adhesion Aid
Adhesion Sheets
Glue Stick on Glass bed
Advanced 3D Printing Kit with Adhesion Sheets

Shop3D Product Notes

ABS is an intermediate material to use on 3D printers—like the Ultimaker—and is a material that has been around since the beginning of desktop 3D printing. ABS+ is a variation of ABS that provides lower shrinkage and warpage throughout the printing process while maintaining the high temperature and impact resistance that traditional ABS is known for.

Visually, ABS+ provides a matte-like finish when compared to other 3D printing materials. Furthermore, sharp corners have a more rounded out definition when compared to PETG and PLA. These qualities can result in a high quality look as the matte finish hides print lines (especially in black) and the rounded corners make printed objects look professional. ABS+ is quite tough, and a part printed solid is similar in strength to an injection molded ABS part.

While the exterior of regular ABS prints can be smoothed via acetone vapors, ABS+ is more resistant to the smoothing effect of acetone and is not recommended for individuals looking to smooth their parts using this process.

When printing with ABS+, we recommend (Dimafix) to help with bed adhesion. Proper ventilation is recommended as well.