1.75mm

Bambu Lab - PLA-CF (1.75mm) 1kg

Product SKU: A50-K0-1.75-1000-spl

$44.99

Available Stock:
Loading...

Bambu PLA-CF

Bambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low clogging risk at high-speed printing. The prints are in matte finish with almost invisible layer lines, which make it suitable for printing general engineering parts or models requiring a better appearance, like bike frames, brackets and toys.

Carbon fiber texture & Minimized layer lines

The addition of carbon fiber gives prints a unique matte finish and effectively hides layer lines, providing a smooth, premium look.

Bambu PLA-CF: Improved strength and layer bonding. Print with regular PLA. Matte finish with minimal layer lines. Easy support removal.

Display of Prints

Bambu PLA-CF could be paired with any PLA series filament to make your prints more colorful and achieve various texture requirements.

Improved mechanical properties

Bambu PLA-CF exceeds the mechanical properties of PLA Matte in XY Bending Strength, Z Bending Strength, XY Bending Modulus, Z Bending Modulus, XY Impact Strength, and Z Impact Strength by between 20% and 115%, making it more suitable for printing models with higher strength requirements.

Stablized printing dimension

Bambu PLA-CF features low shrinkage and warping resistance to achieve a perfect matching accuracy between prints parts.

Minimal effort in support removal

Bambu PLA-CF is designed to support itself. It can be removed more easily compared to regular PLA, and still maintains a smooth support surface.

Not prone to clogging in high-speed printing

Bambu PLA-CF is just as easy to print as regular PLA. It can be printed smoothly and consistently at high speed without clogging.

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

Recommended Printing Settings

Drying Settings (Blast Drying Oven): 55 °C, 8 h
Printing and Keeping Container's Humidity: < 20% RH (Sealed, with Desiccant)
Nozzle Temperature: 210 - 240 °C
Bed Temperature (with Glue): 35 - 45 °C
Printing Speed: < 200 mm/s

Physical Properties

Density: 1.22 g/cm³
Vicat Softening Temperature: 69 °C
Heat Deflection Temperature: 55 °C
Melting Temperature: 165 °C
Melt Index: 3.7 ± 0.6 g/10 min

Mechanical Properties

Tensile Strength: 38 ± 4 MPa
Breaking Elongation Rate: 8.4 ± 3.2 %
Bending Modulus: 3950 ± 190 MPa
Bending Strength: 89 ± 4 MPa
Impact Strength: 23.2 ± 3.7 kJ/m²

Downloads