$59.99
Replacement / Spare Adhesion Surface to be applied to a Pro2 Build Platform. Dimensions: 13.3 x 13.3 (inches). Fit for the Pro2 Series of printers only.
$68.00
Raise3D Tool Steel Nozzle with WS2 Coating Raise3D Tool Steel nozzles for the Pro2, E2 and Pro3 printer series. Coated in WS2 for abrasive material printing. Various sizes at 0.4mm /...
$114.99
Replacement / Spare Hot End Assembly. This part can also be used to house different size nozzles, as changing hot end assemblies is often faster than nozzle swaps on the Pro2...
$26.00 $29.99
Brass Nozzle for Raise3D Pro2, Pro3 & E2 Series 3D Printers Raise3D brass nozzle in 0.4mm for the Pro2 Series, Pro3 Series and E2 3D printers. Installing Hot-Ends Pro2 Series Hot-end installation instructions can...
$69.99
Replacement / Spare Printing Surface for the E2 & E2CF (Buildtak) * E2 Flexible Build Plate not included *
$64.99
Replacement / Spare Adhesion Surface to be applied to a Pro3 Build Platform. Dimensions: 13.11 x 13.11 (inches). Fit for the Pro3 Series of printers only.
$13.79
Replacement / Spare Silicon Cover
Sold Out
Raise3D Interchangeable Hot End A new Interchangeable Hot End for Raise3D Pro3 Series of 3D printers. Comes with full hotend with 0.4mm Brass Nozzle pre-installed.
$9.99
Replacement / Spare Temperature Sensor
$14.99
Replacement / Spare Heat Sink Fan
$112.99
Left-hand Extruder Replacement / Spare Hot End Assembly for the Raise3D E2. This part can also be used to house different size nozzles, as changing hot end assemblies is often faster...
$9.99
Replacement / Spare Part Cooling Fan
$112.00
Replacement / Spare Flexible Build Plate and Printing Surface for the E2
$116.99
Raise3D Pro3 Build Plate with Protector A new build plate for Raise3D Pro3 series 3D printers. Comes with a sheet of Pro3 Buildtak Printing Surface.
$71.99
Replacement build glass plate for the Pro2 / Pro2 Plus / N2 / N2 Plus printer. Size 330mm x 340mm x 1/8"
$112.99
Right-hand Extruder Replacement / Spare Hot End Assembly for the Raise3D E2. This part can also be used to house different size nozzles, as changing hot end assemblies is often faster...
$28.99
Replacement/Spare Teflon tube for the Pro3/Pro3+ (2 in a pack) This is a replacement part that fits the printhead on the Pro3/Pro3+ series machine, it is the same for the...
$59.99
Replacement Filter for Raise3D E2 Printer. Recommended: To be replaced every 3-6 months.
$156.99
Replacement / Spare build plate with no adhesion sheet. This part can be used to put a different kind of adhesion surface instead of the BuildTak like a PEI, or...
$195.00
Raise3D - Hyper Speed Hot End 0.4mm (Pro3 Series Only) High-flowrate hot ends designed for the Pro3 Series on Hyper Speed Mode. Important Information Please note that for Hyper Speed...
$70.99
Fan & Air Filter Assembly for the Raise3D Pro2 Series
$14.99
Extruder / Heatsink Front Cooling Fan (Left Side) - Raise3D E2 Series
$12.99
Raise3D Side Cooling Fan Cover - Pro3 Series Side Cooling Fan Covers for Raise3D Pro3 Series only.
$20.79
Replacement Model Cooling Fan for Raise3D Pro3 Series 3D printers.
$12.99
Replacement Guide Tube for Raise3D Pro3 Series 3D printers.
$24.99
Brass Nozzle for Raise3D (N Series Printer Only) Raise3D brass nozzle in 0.4mm N Series of Raise3D printers. The V2 Brass Nozzle has excellent thermal conductivity, which means it can transfer heat from the hot end...
$14.99
Replacement / Spare Cooling Fan
$77.99
Replacement Auto-Leveling System Assembly for Raise3D E2 & E2CF 3D printers.
$105.00
Raise3D Hot End Assembly (V2) (N Series Only) Raise3D N series extruder hot end kit, including a brass nozzle, aluminum heating block, throat pipe (built-in PTFE tube), silicone protective cover....
$51.99
Raise3D Pro3 Series Filament Run-Out Sensor New Fialment Run-Out Sensors for Raise3D Pro3 Series of printers.
$64.99
Raise3D Pro3 Build Surface A new Build Surface for Raise3D Pro3 Series (spring sheet only).
$99.99
Raise3D Pro3 Auto-Leveling Assembly A new Raise3D Auto-Leveling Assembly for the Pro3 Series.
$259.99
Replacement Hot End Assembly for Raise3D E2CF 3D printers.
$14.99
Replacement / Spare X Y Belt for the Raise3D Pro2 Series. Recommended: Replace every year.
$13.60
Raise3D Coupler for Pro2 and Pro3 series printers.
$185.00
Raise3D Interchangeable Hot End with Upgraded Nozzle A new Interchangeable Hot End for Raise3D Pro3 Series of 3D printers. Comes with full hotend with 0.4mm WS2 Tool Steel Hardened Nozzle...
$14.99
Replacement / Spare Cooling Fan.
$20.39
Raise3D E2 Extruder Connection Cable - E2 Series Packaging Size (WxDxH): 130x110x20mm Weight with Packaging: 32g
$64.99
Print Calibration made simple! Ember’s new Camera-Assisted XY Calibration Tool (CXC) is a small device that easily performs XY offset calibration on dual extruder, IDEX, and tool changing 3D printers,...
$17.67
Raise3D Pro3 Heating Block A replacement heating block for the Pro3 series of Raise3D printers.
$20.39
Raise3D Pro2 Left Hot End Fixing Mount For Raise3D Pro 2 series only.
Sold Out
Replacement / Spare Z Belt for the Raise3D Pro2 Series. Recommended: Replace every year.
$271.99
Raise3D Right Extruder without Hot End Assembly (Pro3 Series Only) A replacement left extruder for the Raise3D Pro3 and Pro3+ series of 3D printers.
$40.79
Raise3D Pro3 P Heating Rod A replacement P heating rod for the Raise3D Pro3 and Pro3+ series of 3D printers.
$13.59
Raise3D Pro3 P Thermocouple A replacement P Thermocouple for the Raise3D Pro3 and Pro3+ 3D printers.
