Features

• Less Clumping and Stringing
• Premium Print Surface
• Improved Mechanical Properties & High Flexibility
• Comes with Basic Reusable Spool
• Diameter: 1.75mm +/- 0.03mm

Cautions for use

• 0.2 mm Nozzle Not Compatible
• Stainless Steel Nozzle Not Recommended
• Dry before Use for the Highest Print Quality
• AMS Compatible
• AMS lite NOT Compatible

Enhanced Strength and Stiffness

With the addition of carbon fiber, Bambu PETG-CF overcomes the low stiffness of regular PETG and delivers improved strength and toughness, making it a solid choice for structural and load-bearing parts.

Ready for Outdoor Use

Thanks to its enhanced resistance to heat and moisture, Bambu PETG-CF is ideal for outdoor applications. Feel free to create durable tools for your garden or any outdoor environment.

Carbon Fiber Finish with a Glossier Look

Bambu PETG-CF features a carbon fiber texture that conceals layer lines, while its surface finish is glossier than that of PLA-CF, making it as attractive as it is functional.

Accessory Compatiblity

• Recommended: Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate/Hotend, Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm, AMS, AMS 2 Pro, AMS HT
• Not Recommended: Hotend with Stainless Steel Nozzle All Size, AMS lite

Printing Tips

• Drying Required: Bambu PETG-CF must be properly dried before printing. In a blast drying oven: 65°C for 8 hours; In an AMS 2 Pro and AMS HT: 65°C, 8 hours; On an X1 printer's heatbed: 75°C to 85°C for 12 hours. Store in a dry environment after use. For more details, please refer to: Filament drying instructions on WIKI.
• Nozzle Recommendation: Due to the addition of carbon fiber, PETG-CF requires a more wear-resistant hardened steel nozzle. While a 0.4 mm hardened steel nozzle can be used, a 0.6 mm hardened steel nozzle is recommended to further reduce the risk of clogging.
• Z-Axis Strength: For stronger Z-axis adhesion, increase the infill density. Avoid using an open-frame printer and refrain from setting the cooling fan speed too high, as overcooling can weaken layer bonding.
• Surface Finish: For a shinier appearance, use lower printing speeds and slightly higher nozzle temperatures.
• Refill Guide: The refill filament needs to be used with a spool. For detailed instructions on how to swap in the new filament using the Bambu Reusable Spool, please refer to the guide on WIKI.