Silk-like appearance with ultra-high gloss

Bambu PLA Silk brings a silk-like appearance and long-lasting high gloss to your 3D prints, transforming models into stunning art.

Display of Silk Prints

Bambu PLA Silk is ideal for decorations, artistic projects, and 3D character models or any parts where you want it shinier.

Enhanced Toughness & AMS Compatible

Compared with regular PLA Silk, Bambu PLA Silk was toughened and demonstrates greater resistance to breakage when using AMS printing.

Controllable gloss

The appearance gloss of the model printed by Silk material can be controlled by printing temperature and speed. To get glossier finishes, higher printing temperatures and/or lower speeds are recommended.

Recommended settings: nozzle temperature: 230 - 240 °C, outer wall speed: 30 - 60 mm/s

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through the Bambu Lab AMS (Automatic Material System). Load and print! No more tedious setting steps.

Recommended Print Settings

• Drying Settings (Blast Drying Oven): 80 °C，8 h
• Printing and Keeping Container's Humidity: < 20% RH (Sealed, with Desiccant)
• Nozzle Temperature: 210 - 230 °C
• Bed Temperature (with Glue): 35 - 45 °C
• Printing Speed: < 250 mm/s

Physical Properties

• Density: 1.32 g/cm³
• Vicat Softening Temperature: 56 °C
• Heat Deflection Temperature: 53 °C
• Melting Temperature: 152 °C
• Melt Index: 20.5 ± 1.2 g/10 min

Mechanical Properties

• Tensile Strength: 27 ± 4 MPa
• Breaking Elongation Rate: 3.5 ± 0.6 %
• Bending Modulus: 2370 ± 150 MPa
• Bending Strength: 66 ± 4 MPa
• Impact Strength: 24.5 ± 1.7 kJ/m²