Magigoo Pro Metal is designed as a professional first layer adhesive with BASF Ultrafuse® 316L. Magigoo Pro Metal is non-hazardous, non-flammable and also approved for use in post processing stages of BASF Ultrafuse® 316L. Magigoo Metal also enables easy part removal of the green parts from the build-plate.
Due to the thermoplastic nature of the filament binding materials and the differential thermal cooling during FDM printing, parts printed BASF Ultrafuse® 316L are susceptible to warp. Furthermore due to the delicate nature of the green part, care must be taken when removing parts printed in BASF Ultrafuse® 316L to avoid part deformation. Magigoo Metal provides sure and reliable adhesion during printing and enable the easy removal of the printed part through submersion in water, thus avoid potential damage to the green part.
For use of Magigoo Metal with BASF Ultrafuse® 316L a build-plate temperature of 95-105 °C is recommended, nonetheless, the printing conditions might vary between one printer and another.
$649.00
Very Important - Special Considerations for 316L: This filament is considered an expert user level filament. Successfully printing, debinding and sintering requires very specific workflows that must be followed without...
$485.00
Very Important - Special Considerations for 17-4PH: This filament is considered an expert user level filament. Successfully printing, debinding and sintering requires very specific workflows that must be followed without...
$62.50
Debinding and Sintering Coupon for Ultrafuse 316L and 17-4PH Metal Filament - Valid for 1kg of Printed Parts (each 316L spool is 3kg so you will need multiple coupons). Cost...