All Filament
UltiMaker PLA Filament
$84.00
UltiMaker PLA Filament PLA is Shop3D's recommended choice for all 3D Printing for Schools/Libraries/Homes. It is easy to print, does not have offensive odours and the colours are nice and...
UltiMaker Tough PLA Filament
$84.00
UltiMaker Tough PLA Filament UltiMaker Tough PLA is a technical PLA (polylactic acid) material with a toughness similar to ABS. It is ideal for printing functional prototypes and tooling at...
UltiMaker ABS Filament
$84.00
3D Printing with ABS does release harmful odours. ABS should not be used in a classroom environment without an enclosure and filtration. ABS printing should be conducted in a well-ventilated...
UltiMaker CPE Filament
$100.00
For best results with Engineering filaments, consider the Advanced 3D Printing Kit for added reliability. UltiMaker CPE SDS UltiMaker CPE TDS UltiMaker CPE+ UltiMaker CPE+ material is chemical resistant with high dimensional...
UltiMaker Breakaway Support Material
$134.00
UltiMaker Breakaway Material UltiMaker Breakaway is a support material for multi-extrusion 3D printing. Breakaway support is quick to remove and does not need further post-processing for a smooth finish on...
UltiMaker PVA - Dissolvable Support Filament for all S-Line Printers
$81.00
PVA absorbs moisture from the environment extremely quickly. See some of out PrintDry solutions here UltiMaker PVA station is now available to assist with post processing and removal of PVA...
UltiMaker CPE+ Filament (Engineering)
$117.09
For best results with Engineering filaments, consider the Advanced 3D Printing Kit for added reliability. UltiMaker CPE+ SDS UltiMaker CPE+ TDS UltiMaker CPE+ UltiMaker CPE+ material is chemical resistant with high dimensional...
UltiMaker Polypropylene Filament (Engineering)
$97.00
For best results with Engineering filaments, consider the Magigoo PP for added reliability. UltiMaker PP (Polypropylene) UltiMaker PP (polypropylene) is durable. It has high toughness, exceptional fatigue resistance, and low friction. It...
UltiMaker Polycarbonate Filament (Engineering)
$117.00
For best results with Engineering filaments, consider the Advanced 3D Printing Kit for added reliability. Strong, Tough, Heat Resistant Polycarbonate Filament With UltiMaker PC (polycarbonate) material, print parts that are tough, strong,...
UltiMaker Nylon Filament (Engineering)
$117.00
UltiMaker Nylon (Polyamide): Abrasion-Resistant And Durable Used by many manufacturers worldwide, Nylon (polyamide) is well-known for its impressive durability, high strength-to-weight ratio, flexibility, low friction, and corrosion resistance. Its ability...
UltiMaker TPU 95A Filament (Flexible)
$134.00
UltiMaker TPU 95A - Thermoplastic Polyurethane Highly versatile for industrial applications, TPU 95A (thermoplastic polyurethane) filament is the go-to choice for a wide array of manufacturing projects that demand the...
UltiMaker Cleaning Filament
$30.00
Comes in a pack of 10 Sticks Cleaning Filament for the UltiMaker Print Cores Ensure your UltiMaker print cores are always in optimal condition. Especially effective for cleaning a print...
Forward AM | Ultrafuse® PLA Filament
$29.70 $33.00
Forward AM Material is proudly produced in Europe Forward AM | Ultrafuse® PLA Filament for 1.75mm & 2.85mm 3D Printers PLA (Polylactic Acid) – the most used 3D printing material...
Forward AM | Ultrafuse® Professional Series PRO1 High Speed PLA Filament
$37.80 $49.00
Forward AM Material is proudly produced in Europe Forward AM | Ultrafuse® PRO1 1.75 & 2.85mm Filament Forward AM Ultrafuse PLA PRO1 is a special PLA (Polylactic Acid) compound with...
Forward AM | Ultrafuse® PET CF15 (Carbon Fiber) Filament
$71.10 $89.00
Forward AMMaterial is proudly produced in Europe This filament might not be compatible with the Ultimaker Material Station. This is an abrasive filament that will wear down brass nozzles. We...
Forward AM | Ultrafuse® PLA Filament 2.5kg Big Reel
Sold Out
Forward AM Material is proudly produced in Europe We recommend using a Large Spool Holder to dispense this Big Reel. Forward AM | Ultrafuse® PLA Filament - Big Reel These are 2.5kg...
Forward AM | Ultrafuse® PRO1 Filament 2.5kg Big Reel (Netherlands)
$145.00 $169.00
Forward AM Material is proudly produced in Europe We recommend using a Large Spool Holder to dispense this Big Reel. Forward AM | Ultrafuse® PRO1 Filament - Big Reel Forward AM Ultrafuse...
Forward AM | Ultrafuse® BVOH Filament
$54.00 $60.00
BVOH needs to stay in a dry environment, we suggest using the PrintDry Smart Vacuum Filament Containers or the PrintDry Filament Dryer Pro3 Ultimaker PVA station is now available to...
Forward AM | Ultrafuse® PP (Polypropylene) - 700gr
$65.70 $73.00
Forward AM Material is proudly produced in Europe Overview PP is one of the most used materials in the world due to its versatility and ability to engineer lightweight tough...
Forward AM | Ultrafuse® HIPS (High Impact Polystyrene) - 2.85mm - 750gr.
$46.80 $52.00
Forward AM Material is proudly produced in Europe Forward AM | Ultrafuse® HiPS 2.85mm Filament Forward AM Ultrafuse HiPS is a high-quality engineering thermoplastic. HIPS is well known in the...
Forward AM | Ultrafuse® ABS Fusion+ Filament - 750gr.
$40.50 $69.00
Forward AM Material is proudly produced in Europe Forward AM | Ultrafuse® ABS Fusion+ Filament Forward AM Ultrafuse ABS Fusion⁺ made with Polyscope XILOY™ 3D is an engineering filament which has...
Forward AM Ultrafuse® PP GF30 (Polypropylene w/ 30% Glass Fibre) - 700gr
$91.80 $102.00
Forward AM Material is proudly produced in Europe Overview Ultrafuse PP GF30 is polypropylene, reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing...
Forward AM | Ultrafuse® ASA Filament - 750gr. (Netherlands)
$44.55 $49.50
Forward AM Material is proudly produced in Europe These are industrial-grade materials that require experienced 3D printing knowledge. Please consult the technical data sheet. It is recommended to print with an enclosure....
Forward AM | Ultrafuse® TPU 85A Filament - Natural
$62.10 $69.00
Forward AM Material is proudly produced in Europe Forward AM | Ultrafuse® 2.85mm TPU Like in Elastollan™, Ultrafuse TPU 85A has excellent resistance to hydrolysis and good flexibilty at low temperature,...
Forward AM | Ultrafuse® Stainless Steel 316L - 3kg
$495.00 $550.00
Forward AM Material is proudly produced in Europe Very Important - Special Considerations for 316L: This filament is considered an expert user level filament. Successfully printing, debinding and sintering requires...
AquaSys® 120 | Water-Soluble Support Filament (500g)
$120.00 $140.00
AquaSys® 120 | Water-Soluble Support Filament (500g) High-performance, water-soluble support filament–500g spool. Stable at chamber temperatures up to 120ºC. Technical Specs Material Safety Data Sheet | Technical Data Sheet Weight: 500g....
Dremel 3D 1.75mm PLA Filament
$44.00
Dremel Digilab has changed distributors. At this time, stock may be fulfilled from a non Shop3D warehouse. Made for Dremel Printers Dremel PLA filament has been specifically engineered for optimal printing...
Dremel 3D 1.75mm Nylon Filament
$35.00 $64.99
Engineered for Optimal Printing with your Dremel Digilab 3D45 Nylon is a synthetic polymer that softens and melts when it’s heated, building your designs strand by strand and layer by...
Dremel 3D 1.75mm PET-G Filament
$55.00
Strength and Flexibility A thermoplastic filament that combines the strength of ECO-ABS, some flexibility of Nylon and the easy printability of PLA. It is also very durable and temperature resistant....
Dremel 3D 1.75mm Eco-ABS Filament
$59.99
Engineered for Optimal Printing with your Dremel Digilab 3D45 Dremel Eco-ABS filament has been specifically engineered for optimal printing with your Digilab 3D45. Eco-ABS is a thermal plastic that softens...
eSun 3D Printing PLA+ 1kg
$26.00 $29.00
eSun PLA+ in 1kg Spools This affordable filament has good consistency, rigidity and great surface finish with higher toughness characteristics than standard PLA Print Settings PLA + Printing Parameters: Best...
eSun Standard PLA - 1kg Spool
$24.00
Due to the Covid-19 outbreak, our regular stock supply has been disrupted and possibly out of stock for a longer than expected period. We are still receiving regular shipments from...
eSun eSilk 3D Printing PLA - 1.75mm 1kg
$32.50
eSilk PLA filament is more sensitive to moisture than regular PLA filament. Keep the spools in a bag with dessicant and if you notice decreased reliability on your machine, try...
eSun eClean - Cleaning Filament - 0.1kg
$12.00 $16.95
Do not use this filament for printing. Recommended only for cleaning. Cleaning Filament from eSun Clean & unclog your print core. eClean MSDS Ultimaker - Atomic Pull After a...
UltiMaker PETG Filament
$84.00
UltiMaker PETG Filament UltiMaker PETG sets the standard for industrial applications. Easy to use and versatile, it's suitable for a wide range of use cases from functional parts to visual...
Forward AM | Ultrafuse® PC/ABS FR Filament - Black - UL94 Flame Retardant
$61.20 $68.00
Forward AM Material is proudly produced in Europe Forward AM | Ultrafuse® PC/ABS FR Filament (750g.) Ultrafuse® PC/ABS FR is a V-0 flame retardant blend of Polycarbonate and Acrylonitrile Butadiene...
eSun ePLA-LW (Light Weight) Filament 1.75mm - 1kg Spool
Sold Out
eSun ePLA-LW in 1kg Spools - 1.75mm ePLA-LW (Lightweight PLA) is a material specifically developed by eSUN for use with Model airplanes, drones, and Cosplay. Compared to the eSun Wood PLA, ePLA-LW has a more...
MakerBot METHOD X ASA Filament
Sold Out
ASA Precision Material MakerBot Precision ASA is a weather-resistant 3D printing material designed to provide high-performance functional prototypes and end-use parts in demanding outdoor environments. Different from ABS, ASA has...
MakerBot METHOD X ABS Filament - 1.75mm 0.65kg
Sold Out
MakerBot METHOD X ABS Filament ABS (acrylonitrile butadiene styrene) is one of the most common plastics used in injection-molding, found in many common products such as LEGOS, computer keys, power-tool...
MakerBot METHOD X SR-30 Support Filament
Sold Out
Properly support your prints with the SR-30 from Makerbot SR-30 is a proprietary soluble support material developed by Stratasys to work seamlessly with ABS and other higher temp materials. SR-30...
MakerBot Method Nylon Carbon Fiber Filament Black
Sold Out
Print Strong, Heat-Resistant Metal Replacement Parts Carbon fiber reinforced nylon optimized for high strength to weight ratio, stiffness, and heat resistance making it ideal for structural applications and metal. Features...
MakerBot METHOD X Filament 3 Pack (3 SR-30)
Sold Out
Properly support your prints with the SR-30 from Makerbot SR-30 is a proprietary soluble support material developed by Stratasys to work seamlessly with ABS and other higher temp materials. SR-30...
MakerBot METHOD X Filament 9 Pack Mixed (6 ABS, 3 SR-30)
Sold Out
METHOD X 9 Pack The ABS Mixed Pack includes 6 spools of ABS Precision Model Material (2 white, 2 black, and 2 gray) and 3 spools of SR-30 Precision Support...
ePC Filament (eSun) - 0.5kg
$37.00 $45.00
eSun ePC Filament This is a specialty filament which we brought in due to popular demand. Polycarbonate is one of the toughest materials available that can be printed below 300...
eSun 3D Printing ABS+ 1kg
$24.00
3D Printing with ABS+ does release harmful odours. ABS+ should not be used in a classroom environment without an enclosure and filtration. ABS+ printing should be conducted in a well-ventilated...
eSun 3D Printing PETG - 1kg
$26.00
Due to the Covid-19 outbreak, our regular stock supply has been disrupted and possibly out of stock for a longer than expected period. We are still receiving regular shipments from...
eSun TPU95A (Flexible) 1.75mm - 1kg
$32.00 $34.99
Economy TPU eSUN 3D printing filament is tested, and confirmed to work with all FDM 3D printers, with a dimensional accuracy better than +/- 0.05mm Technical Specs eSun Material Datasheet...
eSun ePA Nylon Filament - 1kg - Natural
$36.00 $39.99
ePA Nylon is sensitive to moisture. Always keep it dry before and during printing. Drying solutions available here. eSun ePA Nylon Filament A low-cost nylon filament that also works as...
